A build to cut .008 inch slots into JB Weld.

C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.

This is my first build so I will let you know how I get on

Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.

I have been assembling various machines for a long time, more than 30 pieces have already been assembled, so I decided to post one of the recent projects. CO2 laser machine with a power of 100 watts, the size of the working field is 1600 width and 1800 length.

The idea was to use materials from previuos failed projects into a succesful one. I have build this tiny but powerfull CNC machine mainly using the universal gantry plates for the X and Y axis. Also another innovative part is the fact that I assembled the Z gantry with 2 aluminum sections of 20X40 and one aluminum seccion of the 20X20. I used NEMA 17 stepper motors with GT2 pulleys. This was designed on Fusion360

i had the ox build and wanted to do a more beeffer style so i went with a workbee style machine ..

That is the only cnc you will need for most of your diy projects.

Based on the WorkBee CNC, this is an oversized router built with a specific use-case in mind, for manufacutring beehives, and beehive components

Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js

Stinger displays images in the air by using a single column of LEDs. Special computer code converts graphics to pixels; then, the pixels are send to the strings of LEDs, which with the help of of the motor's fast movement the most colorful are displayed on thin air.

A Delta robot for weeding crops using AI and ROS2

Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.

Super tall 3D printer. All lead screw design.

I saw a video of some one pouring resin in a mold,so i did a little research, i bought some resin,and some molds and magnets all from Amazon, it took me several tries and a big mess but it finally finished. The first pour i poured a small batch to make a templet,i marked all the holes that needed drilling then i marked the underside of the mold where i wanted the magnets, next was making the pcs i needed

Hi my name is crispin and I'm an aluminum addict.

Just ox cnc experiment

A sun cutter only using mirror and glass balls with x and y table movement

Plexi Panel to use for a vfd test enclosure. The box will be wall-mounted on plywood, so the back of the box is not necessary. - The bottom of the box is not necessary because the box will be fixed on concrete on the floor. On the door, I was thinking of putting 4 brackets instead of two. We'll have two 21” doors

Making use of c-beam I have had left over from projects.

I've been doing this for over 20 years. So it's hard not to describe it short.

Belt drive linear scale for Mill and Lathe

A simple but elegent couch legs

The video demonstrates a practical device to reduce whip

Putting together an incomplete CNC router I was gifted, seeking guidance on the areas I don't know what to do with

This has been a long, ongoing build. I’m putting together a custom CNC controller based on the MKS TinyBee running FluidNC, built into a custom aluminum chassis with proper heatsinks, clean wiring, and a set of custom boards and electronics. I’m using high‑end connectors and adding addressable lighting to keep everything both functional and polished. At the same time, I’ve been writing my own pendant firmware from scratch, which I plan to release as open source once it’s in a good place.

A horizontal continuous band sealer