an 8x4 CNC Router based on the OX

Standard OX Build

. .

A portable foam cutter to make your forms everyware using a LiPo Battery.

OpenBuilds box type printer using min-v-wheels for X & Y axis. Designed for plexiglas panel enclosure of build area.

Design of a multifunctional CNC machine.

Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.

150x75 cm OX with additional Y axis supports and hopefully a working double belt system

I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.

It is a first draw of my future Printer/CNC cutter.PCB mill Still need to work more on it

This build is a modified Ox build. The long rails are 1000mm. My build includes a solid clamping table.

Now test ready

Berrybot inspired delta 3d printer with a few other tweaks and modifications.

The Echinus Team change the Firmware from "Teacup" to "Marlin". I use this board in my 3D Printer and it works very good! So I write a short report.

OX MultiMachine

An USB Pendant for LinuxCNC / Mach3

I am building a Laser cutter based off Robert Hummel's Laser V design.

Multi-tool 3D printer, laser cutter, and CNC mill.

ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic plates for the Routy. A simpler, more refined machine.

I hope to have a working prototype built soon.

I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.

Prosthesis is functionality and emotion!

For all other builders and robotic technies!

Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.

Delta printer that uses printed carriages sliding on aluminium extrusions.

Easy build cnc router with t slot profile and nylon machined part

this is my first attempt at a CNC Table

CNC MILLING ROUTER

This is a work in progress(not printing yet). Expect this instructions to grow with time, but for now it is mainly interesting for those who want to take part in developing this printer.

www.cncforeveryone.com TITAN CNC ROUTER is the perfect PCB milling machine or for smaller projects. Don't be fooled by its small size it is capable of routing with the big boys...!

I'm looking to build a large build-volume, accurate, steady 3D printer with the eventual aim of swapping in a diode laser to allow for use as a cutter for printing/cutting parts out of balsa sheet for building model aircraft.

The method used for tool position setting is a matter of personal choice but this is what I do.

I've made a 3D printer

A simple low cost rotomolder.

Converting a ShapeOKO into a 3D printer.

Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.

As a 3rd year mechatronic engineer with a plan to print my 4th year thesis project and with no elegant backup plan, I ran into a problem, I'm gonna need a bigger printer. Loving the DeltaPrintr kickstarter, but needing it before the end of next year I have resolved to make my own.

A little project for a rainy day which some, like me, may find useful.

All's good for assembly, testing coming up soon

One Linear Actuator covering two dimensions, WHAT!