A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..

This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.

My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.

This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!

This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!

A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.

My build log of an adapted Sphinx design with additional height and a larger X and Y axis.

The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.

I've used the good work of Openbuilds & expanded it to suit.

Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews

Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.

Rigid variant of the C-Beam sphinx platform

This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.

CNC Based on CBeam, with No custom Plates, and Z GANTRY

C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.

This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.

Reusing parts to build a CNC - planning stage

24x32 Cnc Router, I used vSlot c Beam Extrusion and Wheels!

I am building a Sphinx 55 from the bones of my old C-Beam machine. Rising from the ashes so to speak.

Simple upgrade of the Y axis on a Cbeam sphinx from 500mm to 1000mm.

C-Beam inspired CnC Router (1000x750) Approx 90mm of Z travel

1st build CBeam Machine w/ raspberry pi-protoneer hat controller

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

My new build to upgrade from my worn out shapeoko

I'm starting with the c-beam bundle, and I hope to end up with a pretty useful little platemaker/shallow relief carver. I'm hoping to discover how accurate and efficient it can be.

a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle

i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture