A full scalable 3D Printer , with a big printing area. Build with openbuild parts from www.vslot-europe.com

Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer

Dual extruder 3D printer and laser cutter.

This is my latest printer build. The second printer I've built using V-Slot.

A Prusa i3 design running on Open Build's mini V wheels

The Prusa i3 (iteration 3) is the newest and most current 3D Printer design by RepRap Core Developer Prusajr (source: http://reprap.org/wiki/Prusa_i3)

My DIY 3D Printer build which is similar to an i3 style printer. This is a fully documented step-by-step build with videos.

Concept for a Prusa i3 made from Cbeam Extrusion. X & Y using GT2 Belts, Z using Acme Screws Goal is to build a simple. and very Solid Printer Single Z Motor to keep the Z Screws in Sync. (Might require Geared Nema 17) 12" x 12" x 12" Build volume Nema 17's

PVC foam Core frame made from a Delta facet display. a curb find while walking home.

OpenBuilds C-beam 15mm belt on 1500mm C-Beam.

Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer

Mid range build.

Remix of the Prusa i3 Bear with added IDEX

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

3D Printer based upon 3d printed parts and open builds componets

Wanna quet an nice looking device done by my hands

Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.

My version a Cartesian style 3d printer, an attempt to eliminate frame vibration and movement and to use up materials left over from other projects.

The process from my bought printer, to a custom home built machine

Mad plumbers choice what Else can i say?

Hell Yeah

A large 12x12x12 build area sturdy printer made of steel

Prusa mini inspired 3d printer

I decided to start designing this printer, this will be my solution for a more rugged printer that you can use as workhorses...