This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!

This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!

A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..

The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.

This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.

A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.

Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews

My build log of an adapted Sphinx design with additional height and a larger X and Y axis.

I've used the good work of Openbuilds & expanded it to suit.

Rigid variant of the C-Beam sphinx platform

My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.

24x32 Cnc Router, I used vSlot c Beam Extrusion and Wheels!

C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.

Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.

CNC Based on CBeam, with No custom Plates, and Z GANTRY

a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle

This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.

C-Beam inspired CnC Router (1000x750) Approx 90mm of Z travel

Reusing parts to build a CNC - planning stage

This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.

1st build CBeam Machine w/ raspberry pi-protoneer hat controller

i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture

My new build to upgrade from my worn out shapeoko

I am building a Sphinx 55 from the bones of my old C-Beam machine. Rising from the ashes so to speak.

I'm starting with the c-beam bundle, and I hope to end up with a pretty useful little platemaker/shallow relief carver. I'm hoping to discover how accurate and efficient it can be.

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

Simple upgrade of the Y axis on a Cbeam sphinx from 500mm to 1000mm.