Easy build cnc router with t slot profile and nylon machined part

This is my first cnc build, never used one before and don't know too much besides what i've read a little bit about them online. It's probably going to be about 31" y axis with hopefully around 4ft x axis, z height is still to be determined.

Large leveling platform to hold a 3hp router

Our version of the OX, a Cartesian CNC Router Build. 1,500 mm Y-Axis, 1,000 mm X-Axis, 300 mm Z-Axis - Lots of Fun!

This CNC Router is to 95% made of standard parts and almost all of them from the http://openbuildspartstore.com/.

I am very grateful to Mark Carew with passion and imagination. Therefore, the machine is good, but making the website there too daedanhaeseo The end of the same either way to invisible homework. Thank you for allowing openbuilds team submitted to the challenge once again for those with a passion that I feel like in Korea, I want to be a great help.

This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!

I wanted to put together a medium size router using PTFE slides from McMaster-Carr. I've had great experience with these slides in long term continuous motion operations in industrial environments.

A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.

My attempt at planning out my own CNC router

My build of the OX kit from SMW3D.com

C-Beam Router using 1500mm lengths, 48x48" build area, and rack and pinion movement.

Most of the way through the build, hopefully soon I will have it running

I'm starting my first own build cnc machine which is inspired by routy and the ox. Were my goal was not to use the ox plates but use the standard plates available in the parts store for the design.

Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.

C-Beam Plate maker for My OX!

Using criticall OpenBuilds components to upgrade the rigidity and reliability of an X-Carve 1000mm build.

This is a stool, designed in 18mm wood for a cnc router, it's easily scaleable to different wood-thicknesses, in 18mm wood it takes up 1200*1200mm. It can be assembled without screws, nails or glue and can therefore also be easily disassembled.

Kind of hard to see in this pic now lining up drive s and finishing framework

I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,

wanted large work area for laser etch/cuts more than spindle work.

One of my first projects might be cutting proper plates.

Using basic standard components, beams, motors, belt drive on x and y, z is a screw. Using Grbl Panel on Windows 10. Really basic router, had trouble getting the controller to turn on the router and set speeds so it is currently wired to a power bar switch so it runs full speed and I just use the switch to turn it on and off. Just getting x, y and z control working properly for now and likely going to switch the router to my dremel 4000 using a 3d printed mounting bracket I got from thingiverse

This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.

Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area

2x4 cutting area, enclosed with dust collection mainly built out of wood.