Build List
-
Active Filters:
custom
Build Author Jacob Lotter Views 23839
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Lead 1515 tilting table and vertical table accessory
I wanted a CNC machine that was able to do dovetails and other box joints. I also wanted to have it be able to tilt so it would take up less space when I was working on other projects.
Build Author Gerald Klein Views 15175
300mm Diameter, 1 Meter tall, Delta 3d Printer
I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.
Custom 4x4 CNC
I started designing and ordering parts for this build back in Oct 2021. Unfortunately life got in the way and I had to sideline the project to deal with more important projects. I am now back working on this project full time. I originally was building a MPCNC on this torsion box platform I built but quickly realized how difficult it would be to produce anything with good accuracy. So I decided to design my own CNC that would be more robust and accurate.
Sphinx 55 on MGN12 linear rails
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
Build Author blterry1 Views 17315
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author crypt-tek Views 32961
C3DO
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
Lead 1510
Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js
Build Author crypt-tek Views 9248
crypt-cube
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
Build Author Corey Corbin Views 5689
Ball Screw Carrier.
Create a ball screw carrier with out BF BK bearing blocks.
Build Author ajdubs Views 3943
A custom arcade
This is an arcade "cabinet" of sorts built almost entirely from OpenBuilds extrusions. Save for a few 3d printed parts, the electrical components, the acrylic panels, and the monitor mount, every component was purchased from the OpenBuilds part store.
1250x1000 Build
A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.
Build Author j0achim Views 11381
CoreXY - e3d inspired
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
Build Author Todd Brous Views 4650
Modified Acro with build plate, Z-axis and OPT Laser
Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.
DTG OX
From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.
Desktop CNC
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
Build Author Kyo Views 5817
C-beam Delta Printer
Large scale delta robot using c-beam as the core frame component.
Build Author Bucky Wootmaster Views 2424
Bucky CNC
CNC machine using extrusions with linear rails and ball screws on all axes - no plates
Build Author Chetan PM Views 3236
Composer
Gantry style rigid build
Build Author CandlerCustoms Views 4579
Candler Customs - Custom CNC Machine
Inexpensive Custom CNC Machine or swappable Laser Engraver utilizing OpenBuilds ACRO System
Stock CNC Router
This is my first CNC router, so be kind on the criticism. I'm still learning. Not an engineer, and not a machinist so I am having to research and learn aspect from both of those areas of study!
New Custom CNC with C-Beam Rails
Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.
Build Author Steve hope Views 17980
8x4 CNC build
Routy cnc upgrade.
Parthenon
Custom build, after building the prusa i3 and upgrading to i3v, I wanted to build something more sturdy that can print fast and more accurate. Model is built in Fusion 360