I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.

i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture

C-Beam Plate Maker with a larger size of the work area and electronics added.

Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.

This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.

A Large Printer that will hopefully be able to print at least 45cm cubed

A table top version of the open build xl router kit set build. This use of c - beam and xl kit set was coupled with Mach 3 controller running on Dell opti -plex 755 and win 7 pro licence. A Dell opti-plex 755 empty case was used to house the controls and wiring , including the limit switch and emergency stop safety circuits

Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".

Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering

This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.

Anti-Twist Design, larger lead screws, enhanced M8 wheel sets.

cnc made with a 6mm metal body .

i would like to build a sturdy motorized photographic copy stand. i have hobbled together a hand crank version using a used umbrella pole but it is not suitable as it is awkward and wobbly.

This is a fully loaded Lead 1010 and located in a shed measuring 3 by 2.50 meters. Here i build my guiyats by hand and the help of my Openbuilds friend! Pure for hobby.

more to come, please follow along the journey!

I have constructed frame out of 1 1/2" square tubing. Have my Y aces mounted. and awaiting parts.

Using criticall OpenBuilds components to upgrade the rigidity and reliability of an X-Carve 1000mm build.

I want to have a printer to support senior projects. Also working on supporting 3D printing needs in the local community.

You will be following the assembly of the mechanical kit and how i integrate the electronics into the final build.

Make a vinyl burrito ENCLOSURE for your TEVO LITTLE MONSTER for < $30 (<$20 if you don't have your vinyl shipped!)

Cheap, experimental Modification to Tevo Little Monster's bowden system for the extruder

How to convert an angle grinder into an electric drill? Remove the angle grinder, leaving only one main motor, and then find a suitable intermediate roller with a point drill to assemble it.

I decided to start designing this printer, this will be my solution for a more rugged printer that you can use as workhorses...