I wanted to make my own unit. I enjoy building and was looking for a challenge.

This is a small desktop vacuum former that can be connected to a shop-vac and an electric heat source (like a grill for instance). You can control the time each appliance stays turned on, and the vacuum is automatically turned on when the tray is placed on top of the model. The vacuum table is 20x20cm wide, and I've tested it mostly with 1mm thick PET sheets.

I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.

A sun cutter only using mirror and glass balls with x and y table movement

So for my senior project I decided to build a CNC router. I kind of need to get this done before May so we'll see what all goes down. It's going to be a 3 axis machine (for now) and will be able to handle 4x8 sheets of wood. This is my first build. It's going to be intresting..

My DIY 3D Printer build which is similar to an i3 style printer. This is a fully documented step-by-step build with videos.

The process from my bought printer, to a custom home built machine

Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.

Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.

Mad plumbers choice what Else can i say?

A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.

Home Made CNC Router from Scrape

i always make laser cutting machine, but when i see openbuilds, this can make more cheap gantry for make laser cutting.

more to come, please follow along the journey!

A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.

C-Beam basic package doubled in size.

This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!

My first Build with V-slot