Get organized with the SharkBits Holder!

CNC knife cutter with loline blades

Rubber company use as a lathe cutter for accurate cuts compared to hand cutting.

CNC machine using extrusions with linear rails and ball screws on all axes - no plates

MY experience as a first time introduction to the CNC world!

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

It start out to be an upgrade of a CNC 3018-PRO but ended up being a full build

Repurposed Steel Table for CNC Router Build.

Future CNC router kit design

I’m custom building a push table / cart for my cnc machines mostly out things I already had in my garage. Using a gray push utility cart as the main body and building around that.

Building a Phlat based CNC for MDF processing. Capacity of 48" x unlimited length.

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

My first attempt at building a CNC style machine. Overall my plan is to use the PlanetCNC breakout board and software to run the machine from a dedicated laptop/tablet.

More stuff here.

Double C-beam Y axis 500mm., Double 2080 X axis 600mm. , C-beam Z axis 250mm, TB-6600 drivers, MKS-DLC32v2 GRBL w/wi-fi and blue tooth

CNC Router with working area 550*550*200

wanted large work area for laser etch/cuts more than spindle work.

2x4 cutting area, enclosed with dust collection mainly built out of wood.

This build summarizes my CNC milling and laser engraving machine conversion from a dimensional lumber frame and electrical mess to an all aluminum frame with a safe and well constructed (IMHO) control system with the resources I had available.

Using the WorkBee to protect doctors against Corona virus.

CNC Glass cutter

Had left over parts from cnc plasma build.

This is a totally original build of an od id grinder and thread grinder, I hope.

C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.

A Journey on the WorkBee Build...

Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.

For a long time I had a project to buy a CNC, in time I have evaluated several possibilities. I chose the option of a pre-constructed and scalable machine according to my needs, with sufficient rigidity features to do work of average importance. The starting investment was important to take into account to allow changes from the open source domain.

Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js

Quick construction. A few pieces of wood recovered in the trash can, two hooks one hinge, a few screws and a little glue. [Edit] Added the SVG file for sharing (I forgot it)

My first build based on the original C beam Sphinx. I’m not sure at this point what the final size will be. I have the parts from the c beam Sphinx and extra beams and lead screws to build up to 1000mm x 1000mm.

Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.

This cnc milling machine is 3 meters by 30 meters,

Just ox cnc experiment

NALCNC: New Open-Source High-Performance Modular CNC System (MPCNC Evolution) – Large Format Kits & Machines

That is the only cnc you will need for most of your diy projects.

I saw a video of some one pouring resin in a mold,so i did a little research, i bought some resin,and some molds and magnets all from Amazon, it took me several tries and a big mess but it finally finished. The first pour i poured a small batch to make a templet,i marked all the holes that needed drilling then i marked the underside of the mold where i wanted the magnets, next was making the pcs i needed

This is a build for those of us that want to work fairly large but are in a tight space and budget

The video demonstrates a practical device to reduce whip