Large 10’x6’ vacuum table made from steel tubing and 1/4 inch steel plate

Built from leftover T-Slot extrusions plates and hardware from other defunct projects.

RF 100w laser cutter build, aluminium extrusion

This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.

Fast, inexpensive, near-zero maintenance, and 2+ years of near-daily use.

Cutting Depron foam panels by an oscillating needle

A build which is based on a metal frame and aluminium plate which I salvaged from a skip. The frame is sized to hold 19" rack units so I'll build my control box into a 3U rack unit (also salvaged). The area available for the build is 700x1200mm. I'll sling a 60W CO2 tube under the base, the beam path will be initially upward into the enclosure.

A 2 axis laser engraving machine, with a manual Z axis.

This is a work in progress ACROS build with new legs and wire tracks.

Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.

1m x 1.8m 60w co2 laser build.

How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow

CNC laser with GRBL firmware on board

I have tested my Opt Lasers laser module on a "open" frame for some time. Decided that I want to test a corexy setup and combine it with a boxed/enclosed design - my goal is to get high precision + a safe setup with protection from the laser light + a fan to extract the smoke/exhaust..

Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.

LASER ENGRAVING DIY 60 WATT

Powder coated multi CNC Z Axis plasma adapter with Proximity sensor. . It can also hold a 80mm Router head/Spindle as seen in my router build.

Attaching V Slot or mutable V Slot end on end to a larger steel frame table.

Building of a big open frame laser engraver.

This is a simple lamp using only 2 LEDs & 2 AAA batteries.

This is a 80w laser which I am building (picture of the case) the frame is constructed with normal square tubing with plastic corners. this laser needs to live outside

A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.

Work in Progress of a laser cutter design. Based on the CoreXY build from https://makerstore.com.au

Starting the next Laser build, Plan to complete within 60 days.

A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.

Cheap chinese K40 laser upgrades, including 60x30cm working area, MKS or SKR controllerboard (smoothieware or marlin, not yet decided.) Light, psu and a bit more :)

I am building a Laser cutter based off Robert Hummel's Laser V design.

i had som left over parts and i dit like to test the corexy control so this is wat i came up with. sorry bad englich.

Large 6 x 10 foot laser table build. New to building CNC

After expanding a Shapeoko 2 with the rails and motors left over, make yourself a laser engraver.

4foot by 2 foot, 10W El-Cheapo blue laser

CoreXY based CNC Laser machine.

IIOT WiFi Plasma CNC.

Full aluminium profiles construction. Synrad 50w CO2 laser. Ruida controller. Yaskawa servo motors

Large format laser build for Student use at my school as well as some personal use.

Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.

Built a 32"x40" ACRO Kit for my 10watt Endurance Laser. Put it in a stand alone clamshell cabinet, added a 340cfm 6" fan and variable speed switch for the fan. Using LIght Burn for my primary software. It seems to be work well.

Progetto di un laser CO2 da 50w Autocostruito, con scheda di controllo MKS Sbase v.1.3 Firmware Smoothieware versione CNC Struttura realizzata con profili T-slot 20x20 e 20x40

I made this from A to Z at home by myself with reading and watching tones of videos. 50 cm X 50 cm but I get 40cm x 35 cm as a real workread

This is my version of the OpenBuilds ACRO System CNC, a 1010 version (1000mm x 1000mm). I need this machine to build PCB prototypes within 2-days at maximum. I will try to build PCBs using drill and laser methods...

I saw a video of some one pouring resin in a mold,so i did a little research, i bought some resin,and some molds and magnets all from Amazon, it took me several tries and a big mess but it finally finished. The first pour i poured a small batch to make a templet,i marked all the holes that needed drilling then i marked the underside of the mold where i wanted the magnets, next was making the pcs i needed

300x300 belt drive laser etching/cutting platform. The design was borrowed from another's blog and customized to fit materials on-hand. Was a very fun project to assemble.

The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.

It startet in May with some leftovers from a cnc router build. Now in the middle of December its 99% finish. Everything is lowcost, spend about 1600$ so far.

DIY CO2 laser build. Budget friendly, 2020 T/V-slot profiles and scalability.

It's a Z floating head idea. Works well. Recommend cleaning the inside of your holes well with Q tips, and polishing the 1/4-20 bolts with car wax and you won't need oil as it slides perfectly. Hope this helps

Je ne sais pas comment brancher mon laser sur la blackbox?