Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    up

TrueUp Kit Version

Aug 10, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

TrueUp Glide

Apr 14, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

Halloumi CNC Machine - Acetal Plates

Oct 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.

Lab Power Supply + Soldering Station

Mar 14, 2018
Category
Everything Else
Build Progress
Build Complete!

A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron

The Archon R2

Mar 19, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The Archon "In the style of Cartesian movement." A brief overview, guide and summary of my highly experimental build. and some insight into the challenges of building such a large format/belted machine.

C-Beam Mini Mite

Jul 9, 2022
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.

MMXL - A MiniMill Conversion

Oct 29, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".

C-Beam to C-Beam XL Upgrade

Dec 27, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

This is my first public build. Please be kind. We upgraded our C-Beam to the C-Cbeam X-Large. I want to give special thanks to Moag and the OpenBuilds team for making this happen.

Upgrading the C-Beam machine

Jan 20, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.

CNC Line Boring Machine

Aug 8, 2016
Category
Everything Else
Build Progress
Build Complete!

This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.

C-Beam Rigid - 'The Hog'

Apr 25, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.

Vox Solid State

Mar 15, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).

Rob's C-Beam Machine XLarge

Feb 28, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.

Workbee CNC on steroids

Nov 23, 2019
Category
Other Style CNC Mills
Build Progress
Build in Progress...

My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it

TrueUp LZ

Apr 6, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A version of TrueUp using linear bearings/rods for the Z axis. This required enough modification to make a separate OpenBuilds project to avoid confusion for DIYers.

Workbee "style" 1010 cnc

Feb 12, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.

Clear Acrylic Dust Shoe

Mar 17, 2019
Category
Everything Else
Build Progress
Build Complete!

Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.

openbuilds rovo 1000mmx1000mm(rovo x)(korea)

Jun 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.

LayerFused X301 - CoreXY Large Volume Printer

Aug 25, 2020
Category
H-Bot and Core XY
Build Progress
Build Complete!

The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.

K40 upgrades

Jan 26, 2022
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Cheap chinese K40 laser upgrades, including 60x30cm working area, MKS or SKR controllerboard (smoothieware or marlin, not yet decided.) Light, psu and a bit more :)

F-Ender-Plus 3D Printer

Sep 7, 2024
Category
Cartesian Style Bots
Build Progress
Build in Progress...

F-Ender-Plus its based on the Ender 3 Pro, but improved: CR-10 hotend, double gear extruder, double z-axis motor, bltouch incorporated, hotbed leveling improved strings kit. Most made using local vendor parts, and still I'm increasing my knowledge of how get better 3D printings by calibrating motors steps, leveling the hotbed and z-axis; using a 3mm thick glass...

Lead 1010 Build - Anything but stock.

Feb 24, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.

Shapeoko 1 upgrades

Mar 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.

OneUpSolid

Oct 11, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is the adult version of the QU-BD juvenile known as their OneUp. It not only uses extrusion framing instead of press board MDF, it is a full sized 8x8 build area w/ABS-Nylon capability. Only the OneUp's single Z axis driver concept is similar. I'm tempted to call it OneUpAdult for marketing.

CNC design (parts named)

Nov 14, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This design is previously posted in this area. I downloaded the file in order to customize as I needed. I found that the parts were not identified. I went through the design in an attempt to name the parts and identify them by location.

Idea for any axis support and Drive

Apr 27, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Just an idea right now but will attempt a prototype in the near future. Not sure if this has been tried before or not.....

Heavy Inexpensive CNC

Sep 28, 2014
Category
Other Style CNC Mills
Build Progress
Build in Progress...

Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice