1500x1000, additional frame stiffening from laser cut Stainless steel bracing plates, Nema 34 motor upgrade and Hiwin 16mm ballscrew additions on the way. Ethernet Smooth stepper control, 2.2kw Water cooled spindle. Schneider atv320 variable speed drive. SICK inductive limit switches, Leadshine Em882S stepper drivers ,1kw 62V supply for Stepper drives

Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.

The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.

The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine

Killerbee 1515 with modifications.

A 1000x1500mm QueenBee Pro with a 4th Axis Rotary attachment/Lathe Bed.

A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.

Here are the instructions to build the Beeline custom CNC router table.

Hopefully an upgrade of the Z axis of the Workbee.

Shawn's adventure in assembling and customizing the Openbuild's version of the 1500x1000 Workbee.

My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.

The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine

My goals for this build were to eliminate slop and flex while also allowing easy serviceability.

Improvements both real and suggested for the Workbee assembly

My workbee build with some add ons

Ball screw drive, linear rail CNC Kit

Adding a rotary axis to the Workbee 1010. Including height modifications to the Workbee.

Workbee 1010 with Duet controller from Ooznest

I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!

WorkBee1510 with retractable space saving stand and customize build Marlin firmware and MarlinPanel (GCode Sender/UI)

Increase Z axis travel by 20-25mm with minimal modifications

V-Beem horizontal milling machine built on OpenBuilds components. Simple structure, great expansion possibilities, high stiffness.

CNC MACHINE WORKBEE'S table making

I'm new to this whole process, so this is a build by a newbie for newbies.

Z-Axis upgrade with linear rails, SFU1204 Ball Screw and full aluminium construction.

Based on the WorkBee CNC, this is an oversized router built with a specific use-case in mind, for manufacutring beehives, and beehive components

A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router

Build features include a double c-beam gantry (bonded & mechanically fastened), linear x rails, custom gantry end plates, a custom linear rail & ballscrew Z axis, and custom lead screw tensioning plates. The primary goal was to remove twist from the 1500mm gantry & stiffen the Z axis.

Using the WorkBee to protect doctors against Corona virus.

Getting more height out of the !510

Hey all looking forward to sharing this build, I’ve learned a lot reviewing many of these great builds.

Workbee, 1000mmX750mm , from China

My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it

The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine

I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?

This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.

A Workbee able to cut 48"x24" material, built to continuously feed material so one can cut full sheets of ply.

Workbee 1510 screw driven build by MsDosFX.

This is a WorkBee 1000x1000mm with lead screws and Nema17's. It has a reduced footprint, with the geared Nema's inside the frame.

This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.

The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.

Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..

Workbee 1010 Lead Screw with water cooled spindle and enclosure

A Journey on the WorkBee Build...

Improvements on the Lead machine using some Workbee parts

This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.

This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.

This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.

Wanted a nice project to work and learn on... now have a big CNC to play with A 1500x1000mm Workbee

Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon

This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.

This CNC build is to help with some areas of my guitar builds - mainly inlays but some body work as well where appropriate. I expect it will be used for lots of other things once I get to know what it's capable of (sorry - what I'm capable of!).

Workbee CNC 1500x1500 with timing belt

a 1000x1000 acme screw workbee built as frugally as possible. thanks so much to ooznest and openbuilds :)

I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.

A short summary of my Workbee CNC Build. I try to update it where I can

Hoping to build a WorkBee 1000 x 1000 (2000) from parts and not a kit, cannot afford the kit in full so going the long way round...

This will be my first build ever! Looking forward to it , just gotta finish the new workshop first then I'm on it!

Trying to design modular and evolutive supports for my brewery tanks.

Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.