Hoping to build a WorkBee 1000 x 1000 (2000) from parts and not a kit, cannot afford the kit in full so going the long way round...

I'm Brandoneous; hence, the BrandoneOuX, a cartesian CNC build. Large format (1000mm x 1000mm) but beefed-up to solidly augment the ability to cut Aluminum in addition to wood and other solid materials. As I am currently living in a rented apartment for an out-of-state job, my secondary challenge is to build a sound dampening enclosure that will function as a torsion box base, a sound dampening enclosure, and a dust containment system. Easy, right? Well, we'll see... Join my journey

This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.

A complete noob stumbling thru his first cnc build in winter.. and trying to find the time with 2 toddlers..

My attempt at planning out my own CNC router

Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering

In progress

Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power

This box is made from tough aluminum with plastic boards, helps hold WiFi Routers, Modems, or/ Ethernet Switches! The aluminum can resist the heat produced by these electronics, and the weight of the electronics, also being light itself. This box is the thing you need to hold your electronic devices!

So Instead of buying a CNC Router which can cost thousands of dollars I ventured on the quest to design and build my own. I have multiple parts to this series. Hopefully all of my information I share helps!

Get organized with the SharkBits Holder!

My workbee build with some add ons

CNC knife cutter with loline blades

A cabinet to keep a constant temperature for pizza or bread mother dough to grow.

1m x 1.8m 60w co2 laser build.

Lead1010 build

I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

CNC machine using extrusions with linear rails and ball screws on all axes - no plates

MY experience as a first time introduction to the CNC world!

First and foremost, I want to create accurate parts for my model aircraft. In second line I am interested in the control and electronics of the milling machine. If you are interested in drawings and the parts list, feel free to contact me.

A work-in-progress build using OpenBuilds parts to create a mortising jig.

I’m custom building a push table / cart for my cnc machines mostly out things I already had in my garage. Using a gray push utility cart as the main body and building around that.

Repurposed Steel Table for CNC Router Build.

Future CNC router kit design

Starting the next Laser build, Plan to complete within 60 days.

Building a Phlat based CNC for MDF processing. Capacity of 48" x unlimited length.

This items are so cool that they need to be together, so I decided to create brackets that connect both pieces together

Large format laser build for Student use at my school as well as some personal use.

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

More stuff here.

Using basic standard components, beams, motors, belt drive on x and y, z is a screw. Using Grbl Panel on Windows 10. Really basic router, had trouble getting the controller to turn on the router and set speeds so it is currently wired to a power bar switch so it runs full speed and I just use the switch to turn it on and off. Just getting x, y and z control working properly for now and likely going to switch the router to my dremel 4000 using a 3d printed mounting bracket I got from thingiverse

From plywood and linear rail to c-beam. I probably should have bought a kit.

2x4 cutting area, enclosed with dust collection mainly built out of wood.

CNC Router with working area 550*550*200

wanted large work area for laser etch/cuts more than spindle work.

3d printable galvos

Quick construction. A few pieces of wood recovered in the trash can, two hooks one hinge, a few screws and a little glue. [Edit] Added the SVG file for sharing (I forgot it)

CNC Glass cutter

Using the WorkBee to protect doctors against Corona virus.

A Journey on the WorkBee Build...

Ventilator prototype based of OpenBuilds Stock parts

Had left over parts from cnc plasma build.

This is a totally original build of an od id grinder and thread grinder, I hope.

Built a 32"x40" ACRO Kit for my 10watt Endurance Laser. Put it in a stand alone clamshell cabinet, added a 340cfm 6" fan and variable speed switch for the fan. Using LIght Burn for my primary software. It seems to be work well.

I have built four of these frames. The first pictured I have been using for maybe a year or two and bought the clamps. The last three I have made I have built my own clamps with openbuild parts. I am still working on the design. At present I use wedges to apply pressure to the side of the wood and block. I am working on a cam system to apply pressure. I just bought 8mm screws with Knobs for quicker adjustment. I will update the build when I make these improvements.

C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.

A build to cut .008 inch slots into JB Weld.

Cartesian style CNC with a working area of around 360mm x 360mm x 120 mm (X, Y, Z) using Linear rails and ball screws. The linear rails are (Hiwin?) HGR 20mm x 520mm and the ball screws are SFU1204 (12mm lead 4mm) of around +/- 430 mm. The base structure is made from rectangular aluminum profiles of 70mm x 45mm x 3mm (thickness of walls).

a 1000x1000 acme screw workbee built as frugally as possible. thanks so much to ooznest and openbuilds :)

Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.

i had the ox build and wanted to do a more beeffer style so i went with a workbee style machine ..

Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js

Stinger displays images in the air by using a single column of LEDs. Special computer code converts graphics to pixels; then, the pixels are send to the strings of LEDs, which with the help of of the motor's fast movement the most colorful are displayed on thin air.

Based on the WorkBee CNC, this is an oversized router built with a specific use-case in mind, for manufacutring beehives, and beehive components

That is the only cnc you will need for most of your diy projects.

A Delta robot for weeding crops using AI and ROS2

GHOST Case build for the OpenBuilds Black Box Motion Control System

Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.

I have been assembling various machines for a long time, more than 30 pieces have already been assembled, so I decided to post one of the recent projects. CO2 laser machine with a power of 100 watts, the size of the working field is 1600 width and 1800 length.

A mixed drive, PI Controlled machine

The Sphinx has all the components I need, except it will need a taller vertical lead screw, the same length as the horizontal ones. It will also need legs. So I need to start with the Sphinx parts list, then make a few changes.

I saw a video of some one pouring resin in a mold,so i did a little research, i bought some resin,and some molds and magnets all from Amazon, it took me several tries and a big mess but it finally finished. The first pour i poured a small batch to make a templet,i marked all the holes that needed drilling then i marked the underside of the mold where i wanted the magnets, next was making the pcs i needed

Just ox cnc experiment

A sun cutter only using mirror and glass balls with x and y table movement

Making use of c-beam I have had left over from projects.

Plexi Panel to use for a vfd test enclosure. The box will be wall-mounted on plywood, so the back of the box is not necessary. - The bottom of the box is not necessary because the box will be fixed on concrete on the floor. On the door, I was thinking of putting 4 brackets instead of two. We'll have two 21” doors

Belt drive linear scale for Mill and Lathe

A simple but elegent couch legs

Je ne sais pas comment brancher mon laser sur la blackbox?

This build will use 1/2 inch copper water pipe as the primary material for all structural parts. As of now my intent is a cartesian design drawing from a few popular printers. I'm going to use the least amount of printed parts as possible and locally source as much as I can. I have built an EMT-conduit core-xy printer in the past and while it worked out fine, I feel copper is easier to work, manufactured with more precision, still reasonably inexpensive and will look super cool!

The video demonstrates a practical device to reduce whip

Putting together an incomplete CNC router I was gifted, seeking guidance on the areas I don't know what to do with

This has been a long, ongoing build. I’m putting together a custom CNC controller based on the MKS TinyBee running FluidNC, built into a custom aluminum chassis with proper heatsinks, clean wiring, and a set of custom boards and electronics. I’m using high‑end connectors and adding addressable lighting to keep everything both functional and polished. At the same time, I’ve been writing my own pendant firmware from scratch, which I plan to release as open source once it’s in a good place.

A horizontal continuous band sealer