Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...

24x32 Cnc Router, I used vSlot c Beam Extrusion and Wheels!

Hypothesis - Running CO2 laser tubes at high amperage may shoirten tube life in number of hours, but will be made up for by the increase in actual inches engraved/cut using the higher power. This is a long term experiment, so the build status will remain as "Build in progress" until the experiment has been completed.

C-Beam Plate Maker with a larger size of the work area and electronics added.

I've owned some pretty unreliable printers, and I'll leave it at that... This design comes from the need to have a 3D printer that is reliable, period. I didn't have the money for a several thousand dollar 3d printer with an equivalent build area so that was out of the question. Plus as a fledgling Engineer, I really wanted to blood myself on a project. And that's how Old Faithful came to be. A simple, reliable, rigid, durable machine. Made by me :) Also, it'll be tough enough for light CNC.

OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.

I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,

I want to have a printer to support senior projects. Also working on supporting 3D printing needs in the local community.

Large scale delta robot using c-beam as the core frame component.

After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3

A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.

Here's my Sphinx with a few slight modifications.

Open source clock movement stand

A simple made hideaway for ugly electronics

wanted large work area for laser etch/cuts more than spindle work.

My new build to upgrade from my worn out shapeoko

DIY Pano Head

1000mm X 1000mm overhead cnc machine

Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.

Build log for my first CNC machine, a C-Beam Plate Maker

How to modularize the 3D Systems Cube 3 extruder nozzle.

A wonky build to eliminate slop on a long Z axis

My first project build. Concept build to use an existing 7.5 ft tall server rack as the frame. This ptoject may never be completed.

Gantry style rigid build

One of my first projects might be cutting proper plates.

Hi my name is crispin and I'm an aluminum addict.

Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.

Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress

The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.

Work in progress large volume CoreXY printer

I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.

This built is to convert an existing 500x500 C-Beam Machine into 1000x1000. Inspired by several builds including C-Beam Machine : (http://www.openbuilds.com/builds/c-beam%E2%84%A2-machine-plate-maker.2020/) and Gino's build : (http://www.openbuilds.com/builds/c-beam-gtc.3250/)

Design Change - Version 2.0 has a smaller foot print, custom gantry supports, and front and back covers. I will use standard V-Slot for gantry supports leaving me enough travel to manufacture the customer supports with this machine when completed. then update to final build. I also plan to install the controller into the front cover and power supply into the back cover. Should be nice and tidy.

The plan is to make this a fairly stock D-Bot build. We'll see if mods start creeping in.

So for a summary its a great kit that was easy to build, could not be more happy.

Just some repairs and upgrades to my drill press and mitre saw using c-beam.

CoreXY cube with 600x600x800 volume.

A quick and easy way to make a 3-way mitered corner using Corner Connectors

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.

It all started after my prusa i3 build inspired me to experiment with resin 3D printers because I want to learn if they are worth it and if I can design my own printer.

A TrueUp Glide modified to use 20x40 V-Slot with a 300x300 bed.

I love the C-Beam XL concept, this build is my custom version with the goal of increasing rigidity for metal milling.

2 1/2 axis CNC chassis. Convertible to plasma, 3D printer and welder. Currently used as router. Plotting table dim: X axis 620 mm, Y 650 mm, Z 100 mm. Created for teaching purposes, open source license, currently used for engraving ukiyo-e wood plates and printmaking

blueprints here: https://github.com/tomaspavlica/cnc_pkb2

Laser CNC, 60W, didn't have one yet... have to :) This build is a retrofit of a surgical laser into a CNC.

My attempt at a Desktop CNC using C-Beam and Open-Rail with Steel Wheel bearings and LeadScrew Drive.

Routy based build using 1000mm Y axis beams and 500mm X axis beams. Using a 20x80 Z axis to use the OpenBuilds router mount.

An affordable large CNC machine, that so far has been easy to assemble

Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.

Wanna quet an nice looking device done by my hands

This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.

The new MiniMill from Mark and Sonny is a great little machine.

Another MiniMill, different to the OpenBuilds version and potentially more flexible because of the design.

Reusing parts to build a CNC - planning stage

This project is focused on developing a low-cost, portable and open-source FDM 3D Printer.

Build log of the Dixie C-Beam XL CNC Router.

I am attempting to mount The C-Beam Machine XLarge on the wall and have it look like a piece of art and be totally functional as this will be in our livingroom.

This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.

Building my First CNC for PCB milling. Some modification done to the original build from OpenBuild Bundle.

An Openbuilds replacement rail system for the common eBay "K40" C02 Laser Cutter

Home Made CNC Router from Scrape

I will post soon some more details.

I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.

CNC router table based on OpenBuilds C-Beam Machine bundle.

GT2 belt-driven Cartesian 3D Printer on an OpenBuilds Extrusion gantry, developed through Autodesk Fusion 360.

My first attempt at building a CNC style machine. Overall my plan is to use the PlanetCNC breakout board and software to run the machine from a dedicated laptop/tablet.

I would recommend this challenge to any woodworker looking for something new.

I rebuild my 2 meter tall 3D printer into a 100w laser cutter

As a tinkerer and hobbyist I need a reliable quality printer on a budget... Meaning I'm not looking to buy a: Prusa, Zortrax or LulzBot because of the added cost their marketing adds. I can definitely build a machine of hopefully equal quality at a lower cost that is not impacted by the marked-up priced from a large reputable manufacturer. I will need to dedicate time and more time for design shakedowns to ensure I produce a quality machine. Bare with me on this build... Thanks!

This is my first CNC router, so be kind on the criticism. I'm still learning. Not an engineer, and not a machinist so I am having to research and learn aspect from both of those areas of study!

You will be following the assembly of the mechanical kit and how i integrate the electronics into the final build.

OOZNEST Style OX machine with 3D printed panels

First CoreXY. Simple Square build, hopes for faster movements.

The QuorXZ doesn't magically appear. It's gestation takes time, careful attention, and requires many parts. However, when it is ready, a magical, mechanical instrument is born....(and when you finally say its name, it sounds a little bit like "corks").

The goal is to have a relatively strong CNC to be able to cut alu. Working space will be around 800x350x100mm.

My first build based on the original C beam Sphinx. I’m not sure at this point what the final size will be. I have the parts from the c beam Sphinx and extra beams and lead screws to build up to 1000mm x 1000mm.

This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.

This build will be based on the C-Beam Plate Maker, with additional changes based on other builds and ideas.

basic start to design of cnc machine

Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.

a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle

Larger, more rigid build plate C beam machine

A small business idea led us here, lets see where it will go.

1M C-beam xy variant

Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!

Build a manual camera slider.

A modified C-Beam Build with a few Addons

Absolute linear positioning using deBruijn sequences.

A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.

Acro based 2 watt laser platform

https://www.youtube.com/watch?v=NT0N1rt3F7c it's alive

My original Tevo Tarantula kit was ok..... I had issues with the X gantry staying level. I got rid of the wheels and replaced them with linear block bearings. I still had some issues with the X gantry. I swapped out the plastic parts with aluminum which was much better. Still not what I want yet

A table top version of the open build xl router kit set build. This use of c - beam and xl kit set was coupled with Mach 3 controller running on Dell opti -plex 755 and win 7 pro licence. A Dell opti-plex 755 empty case was used to house the controls and wiring , including the limit switch and emergency stop safety circuits

The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.

An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining

C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.

This design is previously posted in this area. I downloaded the file in order to customize as I needed. I found that the parts were not identified. I went through the design in an attempt to name the parts and identify them by location.

The parts are now very reasonable.

To begin the "Build" I have ordered a few parts from OpenBuilds to get started. They are arriving today; according to "tracking". I cant wait! Praise Jesus! This 85 yr old man is getting a "New " life. Hallelujah and amen. Because I am building this on an existing machine, I have to be careful; so I will order some parts then see what I don't need (such as a base); along with parts that I may need to adapt it to the machine. It should be fun! "Caint wait!"