This is a C-Beam build, fairly heavy duty, and 750mm x 750mm. Should be a good, sturdy machine that's relatively easy to assemble.

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

A new derivative of the famous OX CNC, with increases strength, rigidity, and accuracy.

Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.

OX metal build from an noob

A 1000 x 1500 OX build with the ability to router cut dovetails as well as laser engraving and light cutting.

This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.

A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.

A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.

Taller and wider MendelMax 1.5 spinoff

A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.

Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.

Expands y-axis to 1000mm. 1/2 day build.

This unit is made with openbuild v-rail and c-beam. using direct drive with lead screws. Nema23 motors

Work in progress.. but nearing completion :)

modifying ACRO

www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.

A wonky build to eliminate slop on a long Z axis

A 250x250 mm Delta Printer utilizing a Duet Wifi controller and a Titan Aero direct drive extruder.

A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.

First build of CNC OX for the purpose of using it for Guitar building to take a lot of the muscle work out so I can concentrate on the finer details.

The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.

My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.

Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.

We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.

This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!

1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.

more to come, please follow along the journey!

I need a large build plate without spending 10-20k for a "store" built printer.

Here's my Sphinx with a few slight modifications.

C-Beam Machine for PCB milling

A portable foam cutter to make your forms everyware using a LiPo Battery.

A desktop Cartesian CNC router

A practical rotating and stand-alone spool holder which fits any filament extrusion 3D-printer. Several base files provided which make it fit different extruded aluminium profiles.

6 axis rig based on OpenBuild C-Beam and ESP32 MCU, WiFi controlled with custom app.

After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3

CNC Based on CBeam, with No custom Plates, and Z GANTRY

Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".

This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.

My attempt at a Desktop CNC using C-Beam and Open-Rail with Steel Wheel bearings and LeadScrew Drive.

This 3d printer framework was designed for use with the ceraStruder clay 3D printing extruder. More info coming soon.

Delta printer, Bed size 280 cm dimeter Print Height 300 cm not tested yet the speed

pictures and mony doku see later

tronxy x3 like

classic router with a ab table

150x75 cm OX with additional Y axis supports and hopefully a working double belt system

In short...this was a fun project.

DIY Pano Head

How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow

I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.

I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.

Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.

The Acro Laser Machine Build

Upgrade my 5 year old Makerfarm printer to use more V-Slot

A fully aluminium printer made from off the shelf components, no printed parts.

i always make laser cutting machine, but when i see openbuilds, this can make more cheap gantry for make laser cutting.

A simple low cost rotomolder.

CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm

CNC Mini Mill build with some mods after following standard build on Youtube video.

The new C-Beam kit expanded to 1000mm . extra support built in for the extents of the travel.

This build has been an educational experience. Software and hardware alike.

a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle

Custom build, after building the prusa i3 and upgrading to i3v, I wanted to build something more sturdy that can print fast and more accurate. Model is built in Fusion 360

My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...

wooden parts of the enclosure can be removed easily used the existing extraction of my glass bead burners

The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.

Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.

This is a handy machine to assemble touch sensors into display frame.

My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.

1M C-beam xy variant

A Rigid Delta Printer using C-Beam screw actuators

Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825

A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.

IIOT WiFi Plasma CNC.

Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.

Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.

Berrybot inspired delta 3d printer with a few other tweaks and modifications.

The SMW3D OX, original other than a lot of learning!

OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.

Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.

Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds

Simple steel tube design Plasma water table

How to modularize the 3D Systems Cube 3 extruder nozzle.

1500 x 1500 mm OpenBuild CNC

A little project for a rainy day which some, like me, may find useful.

XDrive 3d printer, high quality large build volume.

CNC MILLING ROUTER

Wanna quet an nice looking device done by my hands

C-beam machine mods.

Small CNC - made with some custom lasercut+bent sheetmetal parts + Openbuilds V Slot

The goal is to have a relatively strong CNC to be able to cut alu. Working space will be around 800x350x100mm.

A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.

T-slot, v-slot, aluminum angle make up the majority of the structure.

Super solid core xy build inspired by the e3d tool changer

Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.

Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Here is the consolidation of my woodworking shop, a CNC Router!

This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.

Roberta Clementine's first daughter printer Alice Clementine!