Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    c

Beamlazer Laser cutter CO2 100W

Jan 4, 2020
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.

CNC xPRO Driver

Oct 9, 2017
Category
Circuit - Software Project
Build Progress
Build Complete!

Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)

Dave's Z axis and powder coated.

Apr 16, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

I just did my first Powder coat paint job on a Z Axis with 9inchs of travel for the DIY CNC Plasma Cutter, Mill Head, Router, Engraver, Laser Head, Water Jet Cutter Machine. 2 different Z Axis ride plates and a 80mm Router/Mill Head/Spindle clamp. Baked on finish in a old oven i had.

M4: 1510SS Heavy Mk.I

Aug 22, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.

OpenBuilds ACRO System

Aug 20, 2024
Category
DRAWBOT/ARTBOT
Build Progress
Build Complete!

The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.

Openbuilds 4x8 cnc

Aug 14, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I built this cnc using 2 z axis actuators thinking it would minimize deflection and it seems to be very sturdy. I used 2 1500mm c channels for my x axis, 1 1500mm c channel for my y axis, nema 23 stepper motors, dm556 drivers, 2 24v power supplies, smc5-5-n-n controller, 9mm wide belts, and the Hitachi m12vc router. So far it's working very well with a few hiccups. Programming the controller was a learning experience but I'm very happy with it.

CNC FOR EVERYONE!

May 12, 2014
Category
Other Style CNC Mills
Build Progress
Build Complete!

This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.

C-Beam Machine - MyFirstCNC

Mar 30, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first foray into CNC machines, after much review I decided on the C-Beam machine as it seemed easy to work with and will enabled me to build more and larger machines as I gain knowledge. I am planning on building the machine largely unmodified from the reference design. I will be building the machine an axis at a time as I need to spread out costs over time.

Dragon Plasma cutter

Oct 8, 2018
Category
Plasma Cutter Builds
Build Progress
Build Complete!

Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you

Standalone Torch Height Controller for CNC Plasma Cutting

Mar 4, 2021
Category
Plasma Cutter Builds
Build Progress
Build Complete!

A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)

Workhorse 3D Printer

Oct 5, 2021
Category
Cartesian Style Bots
Build Progress
Build Complete!

Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source

Table saw fence and guide

May 5, 2017
Category
Furniture Builds
Build Progress
Build in Progress...

The idea was to build a proof of concept table saw fence similar to a thru-rip or accusquare fences which retail for 400$, with the added option to motorize the positioning.

Bedroom Builds (BrB) DIY CNC

Jan 12, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.

C-beam Router rack and pinion

Sep 24, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I want build a frame that is as sturdy as possibility while at the same time keeping it as compact as possible. working area will be approx 1200mm x 600mm

G&C Printer

Oct 15, 2015
Category
H-Bot and Core XY
Build Progress
Build Complete!

The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.

Upgrading the C-Beam machine

Jan 20, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.

CORE XY 3D Printer

Aug 24, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.

C-Beam Machine Build

Mar 13, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is my first CNC router build. I want to gain basic CNC building experience so I can go on to build other items such as a frosting or pancake printer.

300mm Diameter, 1 Meter tall, Delta 3d Printer

Jan 14, 2018
Category
Delta Bots
Build Progress
Build Complete!

I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.

YAPCNC (Yet Another Poor's Man CNC)

Jul 12, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Yet Another Poor's Man CNC (YAPCNC) is my first attempt to build a CNC. The idea is for the build to be as inexpensive as posible while being usable for my goals.

KeePrint Monster

Jun 22, 2019
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

Large 2 foot x 3 foot x 4.5 foot build volume Core XY printer build in process at this point. I am designing everything from scratch and using typincal parts bought from amazon for the build.

Modified Sphinx 55 with MGN12 linear rails

Aug 2, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Gigantesque CNC

Feb 22, 2021
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a upgrade to make a little deeper and a little bigger foot print for cutting. This is a copy of design off Rob Taylor idea for Dbl C Beam setup. The goal though is to design it around a new build with minimal tools for some one with no cnc access. Drillpress and drill bits and tap set. A 10in Non ferrous metal cutting blade for my table saw. Paper printer for printing DXF files.

Rezo 1390 100W CO2 Laser

Jul 26, 2023
Category
Laser Cutter Builds
Build Progress
Build Complete!

This laser is a beast. Designed by Jonathan Frost, and built with 45x45mm aluminum for ultimate rigidity. It has a 4'x3' bed with a pass through that can be utilized to cut full 8x4' sheets of plywood, and has a motorized bed. Rēzo is not only faster and more capable than lasers like Thunder Lasers Nova 51 and Aeon Nova 10, but the final build costs are 40-60% less than said commercially available machines. Plans can be found at https://rezo1390.bigcartel.com/product/rezo-1390-plans

Plastic Monstrosity

Nov 17, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.

Proteus

Nov 26, 2013
Category
X/Y Table Style Bots

Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool

Ez3D - Phoenix 3D Printer Build

Jun 24, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is my 1st submission to openbuilds.com and my 1st venture into building a 3D Printer. The Phoenix 3d Printer is a kit from Ez3D, a company based out of Colorado, started and backed by successful Kick-starter and IndieGogo campaigns. The Phoenix 3d Printer kit is currently backlogged 10 to 12 weeks which means quite a wait. I will be chronicling my experience with this kit as I get it done.

PnP 4 axis small/fast machine

Jan 22, 2014
Category
Everything Else
Build Progress
Build in Progress...

You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.

Little Big OX

Jun 5, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.

Foldable Rainwater Collector

Jun 28, 2014
Category
OTHER BUILDS/PROJECTS
Build Progress
Build Complete!

Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.

ROUX - A Routy-OX Hybrid

Aug 1, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic plates for the Routy. A simpler, more refined machine.

Versabot - All metal 3D printer

Sep 30, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

An all metal construction cartesian style 3D printer with a very rigid frame that has the flexibility to function as a desktop milling station or laser cutter with appropriate user designed attachments. Design is scaleable to suit any size requirement. All axis are leadscrew driven. V-Slot and Mini V-wheels have been utilised for the linear rails.

HardKnot OX 4x4

Sep 21, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.

Heavy Inexpensive CNC

Sep 28, 2014
Category
Other Style CNC Mills
Build Progress
Build in Progress...

Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.

Another OX CNC Router

Nov 24, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

An OX CNC router using Blue OX Solutions gantry plates, a Bosch Colt router, and most of the remaining parts coming from Openbuilds parts store. Table has about 22"x55" cutting capacity and I am planning on a combination T-Slot and vacuum hold down system.

CNC Hotwire Foam Cutter

Oct 21, 2014
Category
Everything Else
Build Progress
Build in Progress...

Here is my first ever CNC build. A CNC Hotwire Foam Cutter. I will update about achievements. I would love to read from you guys - advices, ideas. Especially regarding the electronics. I feel confident with the hardware part which I can't say about the electronics part.

no xp cnc

Oct 30, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my first cnc build, never used one before and don't know too much besides what i've read a little bit about them online. It's probably going to be about 31" y axis with hopefully around 4ft x axis, z height is still to be determined.

Angus : A Slightly "Beefier" OX

Dec 1, 2014
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.

BldrBot Pro

Nov 13, 2014
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A completely belt driven cartesian design with a center mounted X motor. This is a very compact, rugged design.

Our OX CNC Router Project

Nov 21, 2014
Category
Cartesian Style CNC
Build Progress
Build Complete!

Our version of the OX, a Cartesian CNC Router Build. 1,500 mm Y-Axis, 1,000 mm X-Axis, 300 mm Z-Axis - Lots of Fun!

Aluminum OX build with some modifications

Mar 15, 2020
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is my OX CNC router. It has been a labor of love for over a year now! I hope you find it interesting and inspiring! I also hope that it gives some of you more experienced CNC builders a different perspective and some ideas!

Non OX CNC Router

Jan 19, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This CNC Router is to 95% made of standard parts and almost all of them from the http://openbuildspartstore.com/.

MaxBox

May 10, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice