Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    a

Rostock TETRA V0

Nov 6, 2016
Category
Delta Bots
Build Progress
Build in Progress...

This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.

C-Beam Machine XL

Feb 9, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.

Cartesian CNC router

Nov 22, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This project has been a steep learning curve in an unfamiliar area for me. It has been a very rewarding experience and has opened up so many more possibilities to pursue in the future.

Kruk 0.1

Nov 27, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a stool, designed in 18mm wood for a cnc router, it's easily scaleable to different wood-thicknesses, in 18mm wood it takes up 1200*1200mm. It can be assembled without screws, nails or glue and can therefore also be easily disassembled.

Sheethexapod

Dec 10, 2016
Category
Everything Else
Build Progress
Build Complete!

Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.

PowerBot

Dec 12, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.

Stainless OX kit

Dec 28, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits

CBeam OX

Dec 30, 2016
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture

LinearRail - 3D Printer

Jan 10, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.

Hlidskjalf, CoreXYU (dual X-carriage)

Jan 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.

Warnke CNC Router

Sep 5, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

A blend of modular aluminum and steel bracketry built to yield fine cuts in hardwood and aluminum. An open table with a shiftable pin-fixture concept will allow the operator to shift longer than Y-travel work-pieces, such as doors, along the Y-axis of the table. This machine has a 44" (X) by 24" (Y) by 8" (Z) travel with water cooled VFD spindle motor, t-slot ext work table, cable carriers, side guards n dual y drives. Total weight (w/base-stand) is about 600lbs.

Budget 1500mm OpenBuilds V-Slot Deltabot Build

Jan 24, 2017
Category
Delta Bots
Build Progress
Build in Progress...

This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.

C-Beam Evolution MkII

May 12, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.

c-beam hello world

Jan 29, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

My first ever build. Straight C-beam with tinyg controller a few do-dads and some make do choices. Non-metric length lead screws to save long lead time. Jog knobs to cover the extra length and also practical. My old Bosch Colt never had it so good. Build out work remains, wire dressing, drag chain, vacuum, permanent base, etc.

1500mmx500mm Kossel Delta

Feb 3, 2017
Category
Delta Bots
Build Progress
Build in Progress...

Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...

Large Delta Printer made from scrap 80/20

Feb 10, 2017
Category
Delta Bots
Build Progress
Build in Progress...

This printer will leverage scrap pieces around the shop to fulfill a single print's needs. It will use a combination of 80/20, OpenBuilds, and 3D printed parts.

CO2 Tube life expectancy experiment - Sponsored in part by Openbuilds

May 11, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hypothesis - Running CO2 laser tubes at high amperage may shoirten tube life in number of hours, but will be made up for by the increase in actual inches engraved/cut using the higher power. This is a long term experiment, so the build status will remain as "Build in progress" until the experiment has been completed.

Amazon Special

Feb 10, 2017
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,

Epoxy dispenser, to apply non-conductive epoxy to electronic board.

Feb 19, 2017
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.

Ox Stainless with ballscrews

Feb 1, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.

Need a catchy name - enlarging CNC

Mar 27, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts

1.4 meter tall build height, 300x410mm build plate cartesian

Mar 26, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.

C-Beam Machine upgrade to 1000mm x 1000mm

Mar 29, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This built is to convert an existing 500x500 C-Beam Machine into 1000x1000. Inspired by several builds including C-Beam Machine : (http://www.openbuilds.com/builds/c-beam%E2%84%A2-machine-plate-maker.2020/) and Gino's build : (http://www.openbuilds.com/builds/c-beam-gtc.3250/)

WannaBe CNC - First time design and build

Apr 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Design Change - Version 2.0 has a smaller foot print, custom gantry supports, and front and back covers. I will use standard V-Slot for gantry supports leaving me enough travel to manufacture the customer supports with this machine when completed. then update to final build. I also plan to install the controller into the front cover and power supply into the back cover. Should be nice and tidy.

CoreXY 3D build one

Sep 20, 2019
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

Schreibotics Fabricator MkII

Apr 14, 2017
Category
Resin Style Bots
Build Progress
Build in Progress...

It all started after my prusa i3 build inspired me to experiment with resin 3D printers because I want to learn if they are worth it and if I can design my own printer.

Dogmeat's Custom C-Beam XL

Feb 11, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I love the C-Beam XL concept, this build is my custom version with the goal of increasing rigidity for metal milling.

Atucnc

May 2, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

2 1/2 axis CNC chassis. Convertible to plasma, 3D printer and welder. Currently used as router. Plotting table dim: X axis 620 mm, Y 650 mm, Z 100 mm. Created for teaching purposes, open source license, currently used for engraving ukiyo-e wood plates and printmaking

Sandy3D wall mounted 1000 mm x 1000 mm C Beam Mill

Jun 7, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

I am attempting to mount The C-Beam Machine XLarge on the wall and have it look like a piece of art and be totally functional as this will be in our livingroom.

Arctic_Stingray CNC

Jun 15, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.

1500x1000mm Adjustable Height

Jul 9, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.

Codename: Gargoyle

Jul 11, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A stout 3D printer build with the hopes of being able to serve as a light mill (PCB) and laser engraver

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice