Simple Swing Arm Build for the Modular Table Series. Create a simple vacuum swing arm that swings over your machine keeping your vacuum hose and router cord, etc. up and out of the way

How to convert your OX CNC to a plasma cutter at low cost

Step by step designing and implementing of my plasma approach

We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.

3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.

A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.

Here are the instructions to build the Beeline custom CNC router table.

Hopefully an upgrade of the Z axis of the Workbee.

In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.

Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.

All metal CoreXY 3D Printer Design with triple z, kinematic bed, and scalable corexy mechanism.

V-SLOT profiles and OpenBuilds accessories give us many possibilities. We decided to build a manual ROUTER SLED using only components of the OpenBuilds system. The design is simple to build, construction takes little time, and the frame is easy to transport.

This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.

Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.

A six axis camera slider with a 7th LIFT axis added!

OpenBuilds C-beam 15mm belt on 1500mm C-Beam.

This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!

Yet Another Openbuilds Printer, my version :-P

My on going build of CNC Mini Lathe

A CNC build using linear rails & lead screws.

Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.

I wanted to make my own Voron, so I made my own Voron,

I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.

Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.

I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.

DIY build of a Co2 Laser cutter/engraver 12x24 working area.

Well I built a C-Beam XL around a year ago, I am still learning things as I make stuff with it, it has been quite a wonderful learning experience. Now I have gained enough confidence and knowhow to Mill the required Plates to build an Acro Laser System using the Acro Laser Sketchup Model. I have pulled the Model apart in Sketchup, isolated the Plates and generated the G-Code to cut/Mill the plates. I have used Sketchucam to generate the G-Code. I Use Mach3 on my C-Beam XL to Mill.

Upgrade your Minimill with an off-set Z Axis Motor

First build of a Lead 1515!

Upgrading printers for Synchronous Leveling

This 3d printer framework was designed for use with the ceraStruder clay 3D printing extruder. More info coming soon.

This is basically a Sphinx variant with few changes of my own...hope it'll work.

Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.

A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.

A Rod-type Linear Actuator based on the 40x40 V-slot profile

Modular and Scalable CoreXY Printer with all metal parts.

This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.

A cabinet to keep a constant temperature for pizza or bread mother dough to grow.

Tough 3D Printer using OpenBuilds Parts!

Stabilus 3d Large Format Printer Kit

My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.

A large format, modular, rack and pinion build designed around OpenBuilds components.

We want to present you the new design of the device which is Router Sled. The whole structure is made of aluminum elements and ensures good quality of the device. We used V-SLOT aluminum profiles and OpenBuilds accessories for the construction. The instructional video can be found on our YouTube channel (subtitles in English soon)

Modified C-Beam which I plan to add a laser module and eventually convert to C-Beam XL size.

This is a custom gear rack drive machine with a 4'x8' cut capacity.

Vacuum Former built with off-the-shelf parts, works perfectly every time!

This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!

This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.

I decided to start designing this printer, this will be my solution for a more rugged printer that you can use as workhorses...

Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.

You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.

Lead1010 build

This modified C-Beam, is a compact, powerful and affordable desktop CNC.

My cnc update and rebuild.

Progetto di un laser CO2 da 50w Autocostruito, con scheda di controllo MKS Sbase v.1.3 Firmware Smoothieware versione CNC Struttura realizzata con profili T-slot 20x20 e 20x40

Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.

1000mm x 1000mm linear rails, double gantry, build in Process... more to come

The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine

Prusa mini inspired 3d printer

3-Axis CNC Laser Engraver running grbl 1.1 in laser mode and Laserweb4.

Another Cartesian style build with parts from the UK, US & China.

This is a small desktop vacuum former that can be connected to a shop-vac and an electric heat source (like a grill for instance). You can control the time each appliance stays turned on, and the vacuum is automatically turned on when the tray is placed on top of the model. The vacuum table is 20x20cm wide, and I've tested it mostly with 1mm thick PET sheets.

My OX cnc upgrade.

Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.

My goals for this build were to eliminate slop and flex while also allowing easy serviceability.

A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.

Very cheap CNC made from laser fired and bent parts.

Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source

In progress CNC, (just design for the momment), I want to get some feedback about the design and the possible flexion of the aluminum profiles chosen

A small business idea led us here, lets see where it will go.

The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine

Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area

An open source 3D printer design with a sturdy V-Slot frame

Heavy Duty build with 1605 Ballscrew and Linear Rail

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood

Building a printer that can fit inside and operate at ~200 C oven temperatures

This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.

Second better project, high durable mainframe, silent work, non vibration.

Here is my Project A CNC 3000 mm by 1500 mm, with a 2.2kW spindle collet ER25 and 4 stepper motor nema 23 425oz-in. The purpose being to have a large work surface for a minimum cost.

This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community

Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds

The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.

DIY design and build of a roughing 2' by 3.5' CNC router

Create a ball screw carrier with out BF BK bearing blocks.

Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.

This is a build for those of us that want to work fairly large but are in a tight space and budget

A small form factor machine in a soundproof enclosure

I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!

Below are the details of my build and a good story for those who read till the end. Sorry for the grammar

WorkBee1510 with retractable space saving stand and customize build Marlin firmware and MarlinPanel (GCode Sender/UI)

This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.

This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.

This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux

China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“

Heavy DIY plasma cutting table

I am satisfied with my build and next one will be even better.

This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.

This is a remix of Marshal Peck's Voxel OX, with some design tweaks inspired by Makerparts and jjcolletta. It has a build area of 300mm X 300mm X 480mm, but is easily configured for just about any build area up to 500mm X 500mm X 750mm. I have used some laser cut acrylic plates and a couple of 3D printed parts in its construction, however it can be assembled using nothing but OpenBuilds parts with the exception of the heated bed and the Y axis carrier for the heated bed.

Functional real-world 3D printer build with RM2-2RS bearings in routed V grooves on phenolic resin rails (lab countertop scraps) and NSK 25mm linear rails/trucks.