Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    ac

Kitchen Space Saver

Aug 7, 2015
Category
Furniture Builds
Build Progress
Build Complete!

The frame is made from all open builds parts, add the rubber feet and pads for the glass. The glass is clear 12" x 16" x 1/4" with a polished edge. A light basket slides on the countertop.

Nightfuel

Feb 4, 2018
Category
Everything Else
Build Progress
Build in Progress...

The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.

All metal Ox hybrid CNC Router Table

Feb 19, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is my second CNC build, but the first one that I design from the ground up. The base is all metal because I want to add Plasma facility later on. I used the Ox model for the gantry plates and made a few changes to adapt to my design. Since I wanted to use parts from my first CNC to save as much as possible, I kept the 5/8 Hi-Lead Screw I had from Roton for the Y and Z axis. I will also add a downdraft table to keep all parts tight on the table for cutting.

Live C-Beam Build @ MRRF2018

Mar 26, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.

Black out Edition Workbee 1010

Nov 28, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..

Bee the Boss

Jun 2, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.

Frezar - Desktop CNC

Nov 15, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.

Sim Racing rig

Oct 23, 2019
Category
Everything Else
Build Progress
Build Complete!

Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds

MakerSL MSL-65 Manual Coffee Grinder Stand

Jan 5, 2020
Category
Everything Else
Build Progress
Build in Progress...

I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.

C-Beam Plate Machine

Feb 23, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...

Budget 1500mm OpenBuilds V-Slot Deltabot Build

Jan 24, 2017
Category
Delta Bots
Build Progress
Build in Progress...

This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.

Atucnc

May 2, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

2 1/2 axis CNC chassis. Convertible to plasma, 3D printer and welder. Currently used as router. Plotting table dim: X axis 620 mm, Y 650 mm, Z 100 mm. Created for teaching purposes, open source license, currently used for engraving ukiyo-e wood plates and printmaking

C Beam Served

Jan 23, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

C Beam Machine built in a server cab. Hopefully this keeps every thing enclosed , clean and quite ?

Arizona OpenBuilds MiniMill CNC

Jan 1, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.

My CNC

Jan 5, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

CoreXY - Tower Printer

Jan 5, 2018
Category
H-Bot and Core XY
Build Progress
Build Complete!

I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.

One more life for a cube

Feb 4, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.

Small PCB, Engraving and Delrin CNC Mill

Feb 28, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first attempt at building a spindle based CNC machine. The intention is to mill PCB boards and mill delrin blocks. The device was built with an Emergency Stop that actually cuts power to the spindle and motors. This is a post build write-up and consists of finished photo compilation and CAD renderings.

C-Beam XLarge X/Y Table

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This OpenBuilds C-Beam XLarge X/Y Table is a great display of how easy it is to modify and create awesome configurations with the OpenBuilds system!

My Workbee 1010

Feb 2, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.

Lead 1010 Build - Anything but stock.

Feb 24, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.

XYZ Factory Bot

Nov 25, 2015
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.

32 Button Hand Pendant for the PlanetCNC Control Board

Feb 24, 2018
Category
Circuit - Software Project
Build Progress
Build Complete!

This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.

Laser cutter

Nov 30, 2018
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Full aluminium profiles construction. Synrad 50w CO2 laser. Ruida controller. Yaskawa servo motors

the Feedback Fractal project

May 17, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.

Modified LEAD machine

Sep 27, 2019
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

Acro 1010 with 10 watt Laser

Feb 5, 2020
Category
LASER - PLASMA BUILDS
Build Progress
Build Complete!

Built a 32"x40" ACRO Kit for my 10watt Endurance Laser. Put it in a stand alone clamshell cabinet, added a 340cfm 6" fan and variable speed switch for the fan. Using LIght Burn for my primary software. It seems to be work well.

AcoustoPlot3D

Nov 17, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The Sphinx has all the components I need, except it will need a taller vertical lead screw, the same length as the horizontal ones. It will also need legs. So I need to start with the Sphinx parts list, then make a few changes.

Sturdy Motorized Photographic Copy Stand

Feb 1, 2023
Category
Camera Sliders - Rigs
Build Progress
Build in Progress...

i would like to build a sturdy motorized photographic copy stand. i have hobbled together a hand crank version using a used umbrella pole but it is not suitable as it is awkward and wobbly.

ACRO System w/Laser 80W

Aug 29, 2024
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This is my version of the OpenBuilds ACRO System CNC, a 1010 version (1000mm x 1000mm). I need this machine to build PCB prototypes within 2-days at maximum. I will try to build PCBs using drill and laser methods...

Foldable Rainwater Collector

Jun 28, 2014
Category
OTHER BUILDS/PROJECTS
Build Progress
Build Complete!

Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.

HAPP Printer

Nov 6, 2015
Category
X/Y Table Style Bots
Build Progress
Build in Progress...

This 3D Printer is made to provide the most accurate results with the least amount of investment. This Printer is being designed to allow the common user to own a very accurate piece of machinery.

First build - small scale

Jan 9, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Using basic standard components, beams, motors, belt drive on x and y, z is a screw. Using Grbl Panel on Windows 10. Really basic router, had trouble getting the controller to turn on the router and set speeds so it is currently wired to a power bar switch so it runs full speed and I just use the switch to turn it on and off. Just getting x, y and z control working properly for now and likely going to switch the router to my dremel 4000 using a 3d printed mounting bracket I got from thingiverse

MQTitan printer

Jan 9, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Components- RAMPS, running marlin, Nema 17, All metal extruder, 600mm lead screws, 600mm 2020 aluminum extrusions, 12v 30a power supply, 12v LED strip, Typical endstops, 600mm 8mm linear rods, Bearing block for 8mm bearings, Openbuilds plates, wheels, and bearings, 500x500mm borosilicate glass plate

Fourth Axis Mill Prototype

Mar 6, 2018
Category
Other Lathe Build
Build Progress
Build in Progress...

I really like the 4th axis I purchased a few years back, but when I went looking for it again the suppliers who once carried it no longer do. Anyone know who makes it? Center hole receives collets. I own a ShopSmith so I am using a 5/8th rod and can mount it's chucks onto this machine. Also I like the use of the skateboard wheels, they are adjustable and one could use more sets over a longer axis. The Sherline z-axis is not my first choice, I just had a spare.

Nema 23 Belt and Pinion Actuator

Aug 20, 2024
Category
ACTUATOR
Build Progress
Build Complete!

This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!

C-Beam® Double Wide Gantry Actuator

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This easy to build actuator is configured to have not only strength, but accuracy! This low profile option offers endless possibilities, and we cant wait to see how this actuator is implemented in your build ideas!

3D printed CNC Machine

Dec 28, 2019
Category
Other Style 3D Printers
Build Progress
Build in Progress...

So I thought I would make the Leon van den Beukel version three 3D printed CNC Machine, it is the third incarnation so you would expect a relatively bug-free CNC Machine with a strong foundation.

Plasma CNC machine

Jan 17, 2020
Category
LASER - PLASMA BUILDS
Build Progress
Build in Progress...

The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.

My large machine 48 X 48

Nov 26, 2023
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

This machine is controlled by a Mach3 BOB. I USED Nema 34 stepper motors and a 3kw, water cooled spindle. I’m in the process of adding a vacuum table with 4 zones. I have an X-carve so I use Easel to create G-code for the large machine. I’m currently looking for a way to stabilize the Y-axis. It wiggles a little, so I want to add another linear rail high on both sides.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice