This is my first major project.

Heavy Duty build with 1605 Ballscrew and Linear Rail

Custom Z Axis for OptLaser 6watt and the Acro System

This is a custom gear rack drive machine with a 4'x8' cut capacity.

GRBL, vvvv, drawbot, penchanger, custom plates

Z-Axis for OpenBuilds ACRO system. It is sturdy enough to carry a small drill.

2x4 Ox with Vac table

This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.

3d Structured Light Scanner with Arduino Controlled Turntable

Easy All-in-One Laser and Mounting Kit for your Openbuilds CNC.

Build progress of custom roller table for applying graphics

My own Design (not an OX Derivative) using standard Parts.

Here are the instructions to build the Beeline custom CNC router table.

A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.

A 1.9 x 1 m table that uses a magnet to move a steel ball and draw geometric patterns in sand. The magnet is moved using a corexy mechanism driven by 3D printer controller board reading the patterns in the form of gcode files.

A hybrid of form ply and aluminium. 835x1260x100mm working envelope.

The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.

Yet Another Openbuilds Router, my version :-)

Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.

This is just a small project to get use to the OpenBuild products.

Here is my Project A CNC 3000 mm by 1500 mm, with a 2.2kW spindle collet ER25 and 4 stepper motor nema 23 425oz-in. The purpose being to have a large work surface for a minimum cost.

Integrating custom machined components and off-the-shelf CNC components to create a portable diode laser etcher with air assist and reasonably substantial z-axis travel.

We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.

My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.

I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.

Low cost, Bluetooth enabled, 3 axis CNC controller. GRBL 0.9 compatible.

Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers

OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.

Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .

OX 1500 x 1000 mm

An OX-inspired mini desktop mill.

[EN] Build of my Multiple OX CNC. It's goal is to run in 2 differents modes : router and 3D printer modes. The router mode will allows the use of a laser diode or a standard spindle. [FR] Construction d'une CNC basée sur l'OX pour des usages multiples. Deux modes principaux sont prévus : l'impression 3D et l'usinage via une defonceuses. Le mode usinage permettra à l'avenir de placerune tête laser pour effectuer quelques gravures simples. Une version française : http://kermareg.be/?page_id=103

A modified OX with more X clearance, MDF plates, vacuum table

Remix of the Prusa i3 Bear with added IDEX

This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.

A small portable CNC Plasma Cutter with some unique features

This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux

Coming soon

This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!

Building the full size OX.

Custom painting machine in designed and wrote the software for. Paintings are with acrylic color on canvas

This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.

A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.

CNC mill for carving / milling Greenland Paddles

A CNC platform designed with swapable heads to do laser engraving/etching/cutting, routing and milling, as well as 3D printing.

TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.

C-Beam build using a double C-Beam for the X axis. 1500mm x 1500mm

BNC3D Signax + Voron = Sigron IDEX

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

The plan is to make this a fairly stock D-Bot build. We'll see if mods start creeping in.

A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.

Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...

So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.

Small Machining Vise designed around 20x80 Openbuilds Rail System

Big brother of the Charging Ox CNC machine.

This is my OX CNC router. It has been a labor of love for over a year now! I hope you find it interesting and inspiring! I also hope that it gives some of you more experienced CNC builders a different perspective and some ideas!

A Modified and augmented Ooznest C-Beam Machine Plate Maker.

A Cut To Length machine controlled by computer

I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.

This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.

This OpenBuilds C-Beam XLarge X/Y Table is a great display of how easy it is to modify and create awesome configurations with the OpenBuilds system!

I hope to have a working prototype built soon.

Small Form factor based 3 axis Gantry style mill, Removeable mechanical module. Removable Electronics. with a removable machine pallet, for automation.

This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances

Improvements to a cnc plasma cutter i designed a while back. Not that it really needs it to work but i think it could be an improvement.

Design of a multifunctional CNC machine.

PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.

Modular easy to adjust scale of the entire build Tablet/LCD monitor SLA 3d Printer.

Just a little light duty laser engraver.

An easy Epic Win for novice engineers new to the RepRap project www.3distributed.com

Building a couple of CNC's based on the Crawlbot

A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.

I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).

The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.

Take your build to the next level with the CNC xPRO V4!

This Belt and Pinion actuator is a great example of how easy it is to convert your machine into a belt drive system.

Bringing your lead screw precision and accuracy to new lengths using a simplistic tension system!

The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.

History about making 3d printer.

OX build with 1.5m gantry the 1m deep table.

Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.

A CoreXY D-Bot 3d printer using gantries as wheel-carriages.

Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.

I love the C-Beam XL concept, this build is my custom version with the goal of increasing rigidity for metal milling.

Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.

This is a K40 machine conversion!!

Phlatprinter MKII Foam Cutting Machine

An open source autosampler to be used in laboratories for the automated analysis of gas or liquid samples.

An easy to source/easy to build, yet quite robust CNC router. This design has not yet be implemented.

How to convert your OX CNC to a plasma cutter at low cost

This is the next version of Dash, now operating much closer to its potential. Please message me if you need anything, such as Simplify3D settings, material information, design intent etc. Since the Pack-and-Go zip file is fairly large (120mB), here is a link where it can be downloaded: https://drive.google.com/file/d/1Q3ygyo_tTrB4UYIV62_wtCSCbWuE3krT/view?usp=sharing Note: I use Solidworks 2022, acquired through their Solidworks for Makers program (check it out!). A super deal at $100/yr

Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.

A 1000 by 1000 CNC Router with linear rails and a control box.

For the x and y Axis you set the zero point with a limit switch, but how can you get the zero position for the z Axis? You have different thickness of material to mill and when you change the tool, you have also a other z Axis positon. With the Sensor, you can define the zero position of the piece automaticly.

This is a machine for placing SMT components on PCBs. It is based on Acro system, off the shelf parts, and a number of custom 3D printed elements.

This is my first public build. Please be kind. We upgraded our C-Beam to the C-Cbeam X-Large. I want to give special thanks to Moag and the OpenBuilds team for making this happen.

I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.

CoreXY cube with 600x600x800 volume.

I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.

Build of a small laser engraver using V-slot profiles and 3d printed parts