CNC Based on CBeam, with No custom Plates, and Z GANTRY

Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".

I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.

pictures and mony doku see later

Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.

How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow

Delta printer, Bed size 280 cm dimeter Print Height 300 cm not tested yet the speed

Build Start to begin Feb 1st.

150x75 cm OX with additional Y axis supports and hopefully a working double belt system

DIY Pano Head

In short...this was a fun project.

i always make laser cutting machine, but when i see openbuilds, this can make more cheap gantry for make laser cutting.

A fully aluminium printer made from off the shelf components, no printed parts.

This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router

My very first CNC Router build. It's completely scratch built.

wooden parts of the enclosure can be removed easily used the existing extraction of my glass bead burners

a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle

My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.

A simple low cost rotomolder.

IIOT WiFi Plasma CNC.

Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.

Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.

A Rigid Delta Printer using C-Beam screw actuators

Tough 3D Printer using OpenBuilds Parts!

Custom build, after building the prusa i3 and upgrading to i3v, I wanted to build something more sturdy that can print fast and more accurate. Model is built in Fusion 360

The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.

First time build of the Lead 1010 CNC with the High Z add on.

Mini Additive Manufacturing Printer by Chris Scholl

My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...

A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.

Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825

The SMW3D OX, original other than a lot of learning!

Simple steel tube design Plasma water table

C-beam machine mods.

Watercooled 3D printer

How to modularize the 3D Systems Cube 3 extruder nozzle.

OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.

Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.

Berrybot inspired delta 3d printer with a few other tweaks and modifications.

Very stout 2'x4' machine with a deep Z axis

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Wanna quet an nice looking device done by my hands

XDrive 3d printer, high quality large build volume.

A little project for a rainy day which some, like me, may find useful.

Super solid core xy build inspired by the e3d tool changer

Major rebuild of my Wanhao Duplicator i3 Plus.

My first printer! I went for a simple cartesian design, based on evilc66 one. It uses 1000 mm C-beam linear actuators. The build volume is 700x700x700 mm^3.

This is the adult version of the QU-BD juvenile known as their OneUp. It not only uses extrusion framing instead of press board MDF, it is a full sized 8x8 build area w/ABS-Nylon capability. Only the OneUp's single Z axis driver concept is similar. I'm tempted to call it OneUpAdult for marketing.

1500 x 1500 mm OpenBuild CNC

Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress

Small CNC - made with some custom lasercut+bent sheetmetal parts + Openbuilds V Slot

Prusa mini inspired 3d printer

Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.

T-slot, v-slot, aluminum angle make up the majority of the structure.

just wanted to share my build of a huge 3d printer. It stands just over 2 meters tall and has a total print area of around 850mm x 850mm.

Lord willing I will be showing you how build a robust and easy to build 3D printer framework using V-Slot rails and rollers. It's a little bulky, but it has all spring tensioned rollers on all axes, and can be built entirely without custom machining on any parts. You will need digital calipers, a drill press, a carbide toothed miter saw for cutting aluminum extrusions, and lots of little screws!

A modern take on a Kossel

Not much to say... Soundproofing box for noisy works... Build in MDF and 20 mm plexiglas. Very effective!!!

A small build using some small vslot scrap piece which shows the versatlity of the v-slot system

Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.

Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later

The 3D printer will be able to print 2x2x2m components and not just in PLA or ABS. It's not just a DIY printer but I'm trying to apply engineering formulas to make it. I'm going to apply the state of art for 3D printing and scannering existing.

OpenBuilds CNC 500x500

Hell Yeah

I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.

Simple enclosure for the OB Minimill

This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.

This Project is meant to teach introductory robotics and arduino styled micro-controllers to HS and MS students.

This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.

This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!

The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.

Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.

Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

This is the largest printer I have found. It is also the cheapest. The reason is that it is run by hand, without computer or motors or electronics. Put an object on one side and move the 3d pen while tracing the object. Move the z dimension by turning the crank on the lab jack to move the printed copy down a notch. Be creative!

Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.

I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.

Micro Ox Build

This project is focused on developing a low-cost, portable and open-source FDM 3D Printer.

Stabilus 3d Large Format Printer Kit

C-Beam XL with v-slot aluminum bed for fixturing.

My goals for this build were to eliminate slop and flex while also allowing easy serviceability.

My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it

This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.

All metal frame 500mm bed Delta 3D printer

This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.

v-slot linear actuator build.

Cartesian type 3d printer build

Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.

Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.

Cheap chinese K40 laser upgrades, including 60x30cm working area, MKS or SKR controllerboard (smoothieware or marlin, not yet decided.) Light, psu and a bit more :)

I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.

I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!

An USB Pendant for LinuxCNC / Mach3

Z-Axis upgrade with linear rails, SFU1204 Ball Screw and full aluminium construction.

Leveling Platform / Stand 3D Printers

I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)

First build of a Lead 1515!

It startet in May with some leftovers from a cnc router build. Now in the middle of December its 99% finish. Everything is lowcost, spend about 1600$ so far.

In order to make some nice traveling video you need a slider .