Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 6 hours.

How to modularize the 3D Systems Cube 3 extruder nozzle.

This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.

You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.

Stacked CoreXY Motion System using only Openbuilds components

Lead1010 build

1000mm x 1000mm linear rails, double gantry, build in Process... more to come

Another Cartesian style build with parts from the UK, US & China.

Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js

Router for making plugs for composite part production, and for cutting CFRP.

My OX cnc upgrade.

Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.

My goals for this build were to eliminate slop and flex while also allowing easy serviceability.

Cheap Ballscrew Ox CNC Router.

Had left over parts from cnc plasma build.

Standard build with high Z using a Gauss probe instead of a router.

Ooznest OX CNC build

6 axis rig based on OpenBuild C-Beam and ESP32 MCU, WiFi controlled with custom app.

The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine

I have tested my Opt Lasers laser module on a "open" frame for some time. Decided that I want to test a corexy setup and combine it with a boxed/enclosed design - my goal is to get high precision + a safe setup with protection from the laser light + a fan to extract the smoke/exhaust..

Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area

Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)

Custom Z Axis for OptLaser 6watt and the Acro System

This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.

Building a printer that can fit inside and operate at ~200 C oven temperatures

This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.

Attached to a scroll saw you can cut nested wooden spirals with this jig. Make two, three, four ... interlocking spirals that unwind/unscrew. Fascinating toys or art objects!

Adding a rotary axis to the Workbee 1010. Including height modifications to the Workbee.

The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.

Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.

I found this to be a very fun exercise in building Bessy and will continue to improve her in the future.

Super Rigid CoreXY 3D Printer

Below are the details of my build and a good story for those who read till the end. Sorry for the grammar

This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.

This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux

Easy to build,low-cost, CoreXY

A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.

This is my first public build. Please be kind. We upgraded our C-Beam to the C-Cbeam X-Large. I want to give special thanks to Moag and the OpenBuilds team for making this happen.

Hobby project

OX Based CNC

A Heavy Duty version of the standard Big Ox build.

Increase Z axis travel by 20-25mm with minimal modifications

An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.

Textile Drawing Machine is a drawing machine thought specifically to draw on textile. Unlike other CNC machine it's dimensions follow the standard textile dimensions (1500mm) and it's on wheels to allow to draw on an unlimited area. TDM has been developed for the project Digital Wax Print, a self initiated research project, carried out by The Future Continuous, a collabration between Olivia De Gouveia and Eugenia Morpurgo.

A heavily modified Ox CNC build to replace SO2.

I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.

The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.

This items are so cool that they need to be together, so I decided to create brackets that connect both pieces together

Rigid variant of the C-Beam sphinx platform

The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.

V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source

Working progress.

Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.

Fully OpenBuilds based Core XY printer design by Rat Rig. CAD files, build manual, build videos available!

Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off. Today done some electronics. Looks ok. https://youtu.be/ls_tl54ruE0

After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates

a dual extruder build using direct drive for flexible filaments

This is the build of a cartesian 3d printer made of an old Anet and Geeeteck, some 2020 alu profil and linear rail. Powered by a Rumba with a Nextion screen. It should be modular and accept dual Extrusion and laser engraving.

TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.

A 1000 by 1000 CNC Router with linear rails and a control box.

A posi-drive leveling printer in 300x300x380mm format that easily breaks down for suitcase size shipping.

Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.

The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons

Z-Axis upgrade with linear rails, SFU1204 Ball Screw and full aluminium construction.

The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.

Need cnc to make alumunium sign, brass stamp, etc

Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers

A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router

This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver

Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.

A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.

Small Machining Vise designed around 20x80 Openbuilds Rail System

This is my OX CNC router. It has been a labor of love for over a year now! I hope you find it interesting and inspiring! I also hope that it gives some of you more experienced CNC builders a different perspective and some ideas!

laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.

A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.

What I'm doing is pretty self explanatory. I've put a few pictures up

A C-Beam machine design, strengthened with extra brackets and plates. GRBL controlled, opto-isolated inputs, jogging box.

Just ox cnc experiment

Super solid core xy build inspired by the e3d tool changer

History about making 3d printer.

How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.

The plan is to make this a fairly stock D-Bot build. We'll see if mods start creeping in.

This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .

The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine

A 1.9 x 1 m table that uses a magnet to move a steel ball and draw geometric patterns in sand. The magnet is moved using a corexy mechanism driven by 3D printer controller board reading the patterns in the form of gcode files.

This is a fully adjustable, low profile rotary axis for your Laser Cutter. Many OpenBuilds components are used, plus a handful of 3D printed parts.

My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it

This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.

This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.

I am building a Sphinx 55 from the bones of my old C-Beam machine. Rising from the ashes so to speak.

GRBL, vvvv, drawbot, penchanger, custom plates

OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.

Gary's take on the OX HD X and Z plates, making it stiffer, adding mini wheels to the C-beam and Quick removable Z axis.

C-beam machine mods.

This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.

CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

low cost 2 axis cnc laser, really portable and easily expandable

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

inspired by http://openbuilds.org/builds/c-beam-sphinx.3605/