LASER - PLASMA BUILDS
OpenBuilds ACRO Z Axis
Z-Axis for OpenBuilds ACRO system. It is sturdy enough to carry a small drill.
KRE CO2 2x4 Laser
Large Format CO2 Laser Cutter
Build Author David E. Flores E. Views 3256
ACRO System w/Laser 80W
This is my version of the OpenBuilds ACRO System CNC, a 1010 version (1000mm x 1000mm). I need this machine to build PCB prototypes within 2-days at maximum. I will try to build PCBs using drill and laser methods...
Build Author cnc-trucker Views 1307
Arduino Mega to EMC2 (LinuxCNC) Plasma Table Conversion
This is a story about a guy who started with a $25 set of plans, and through 4 iterations/ rebuilds, ended up with a professional quality CNC plasma table capable of cutting anything steel up to 2 inches thick.
Build Author Retsaj Views 60335
Standalone Torch Height Controller for CNC Plasma Cutting
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
5'x10' CNC Plasma/Mill Table
Plasma Mill CNC
Dedicated Compact Rotary Axis Laser Engraver
Compact Dedicated Rotary Axis Laser Engraver
Dragon Plasma cutter
Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you
Build Author jaron kennell Views 7065
Rezo 1390 100W CO2 Laser
This laser is a beast. Designed by Jonathan Frost, and built with 45x45mm aluminum for ultimate rigidity. It has a 4'x3' bed with a pass through that can be utilized to cut full 8x4' sheets of plywood, and has a motorized bed. RÄzo is not only faster and more capable than lasers like Thunder Lasers Nova 51 and Aeon Nova 10, but the final build costs are 40-60% less than said commercially available machines. Plans can be found at https://rezo1390.bigcartel.com/product/rezo-1390-plans
Z Floating Head
It's a Z floating head idea. Works well. Recommend cleaning the inside of your holes well with Q tips, and polishing the 1/4-20 bolts with car wax and you won't need oil as it slides perfectly. Hope this helps
Build Author openhardwarecoza Views 73384
openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)
DIY Lasercutter: Budget orientated, medium sized (60-100w), safety first, based on Lasersaur software toolchain
Build Author tshilling Views 35358
K40 12x24in rebuild (In Original Case)
Rebuilt the internals of a K40 to allow for a 12 x 24 in cutting area while reusing the same external case and not touching the laser tube.
Vulcan: 750x1200 V slot 90W Co2 Laser
Tried to get best value and minimal footprint!
Plasma Table 006
Fast, inexpensive, near-zero maintenance, and 2+ years of near-daily use.
My ACRO Build
An ACRO laser put together with some repurposed and some new parts.
Build Author Jason Moore Views 11497
Lead1500 Plasma Table w/THC
lead machine plasma table with Black Box, and Torch Height Control
Build Author wackocrash5150 Views 18159
45W CO2 Laser Build
A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.
Y-1200 co2 laser
Y-1200 Build The Y-1200 has a cutting area of 1200 x 600mm and the main chassis has a external size of 1620 x 955 x 450mm. The recommended power output is 60-90W, this can also be increased with the use of an extension box. designed by furtherfabrication ROB CHESNEY FREELANCE INDUSTRIAL DESIGNER.
Laser Rotary Tool / Attachment
Rotary attachment to engrave cylindrical objects on laser machines
Much4 - LaserV printed version
By following the way of Robert Hummel, I drew a version of its exellent Laser V to use NEMA17 and easily printable parts.
3D printed Laser Engraver
iĀ“ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area
Budget friendly starter build
DIY CO2 laser build. Budget friendly, 2020 T/V-slot profiles and scalability.
Build Author boutrous Views 8036
Laser Rotary Attachment
Build Summary updated after parts list completed
Dedicated Rotary Laser Made from Scrap and Spares
A clone of https://openbuilds.com/builds/dedicated-compact-rotary-axis-laser-engraver.10204/
Custom 40W Laser Cutter
So this is my custom 40W build. I wanted to make another laser similar to the one I built but a lot smaller and an all in one system so that if I ever decide to do a farmers market or something similar, I wanted to be able to put the laser on the back of the car and drive to whatever location. I think it's going to work. It will be see-through with lights and screens eveywhere. The lights alone should attract people like flies. That's the plan anyway.
Build Author tarekhassan2030 Views 4370
Home build from A to Z
I made this from A to Z at home by myself with reading and watching tones of videos. 50 cm X 50 cm but I get 40cm x 35 cm as a real workread
Horizontal Cantilever or Vertical Diode Laser Engraver
Light weight portable Laser Engraver (6.5lbs - 12lbs)
Build Author BNMaker Views 10523
+Laser
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
Dragon Portable CNC Plasma Cutter
A small portable CNC Plasma Cutter with some unique features
Build Author viktop Views 22047
Simple Cnc System (arduino Grbl)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
Build Author joetemus Views 25442
K40 ACRO Conversion
A K40 to ACRO Co2 laser cutter build. Designed and built to expand the work area of the K40
Build Author mytechno3d Views 13872
Z FLoating head for Plasma cutting (OX CNC compatible)
How to convert your OX CNC to a plasma cutter at low cost
W|W plasma/drag knife 1500x1500 (floating head & z-axis)
Step by step designing and implementing of my plasma approach
Build Author Ariel Yahni Views 51666
UK40OB
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
Custom build 80w Co2 Laser Cutter
Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.
Ike:Laser
A 2 axis laser engraving machine, with a manual Z axis.
Build Author Lindsey Lewis Views 8154
Update Eleksmaker with Openbuild eccentrics for X-Carriage
A simple approach to making the Eleksmaker A3 Laser build have a better functioning X-Carriage! Of course this assumes you bought an Eleksmaker A3 or plan to.
ME - Laser CNC
Build of a small laser engraver using V-slot profiles and 3d printed parts
Build Author pedrofernandez Views 16694
Co2 Laser Cutter/Engraver Rotary Attachment
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
The Franken Rotor
Yes another K40 Franken machine dedicated for round objects,,,
Build Author LukasK Views 22372
LS-LASER
I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of āonlyā led laser. That is why I have started this build of co2 laser machine.
5 X 5 Plasma SIMPLE Build
5 X 5 Plasma table...Hypertherm 45 XP....CandCNC....Openbuilds
Build Author pedrofernandez Views 35915
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
Build Author Glenn Weston Views 9896
"AcroCadabra" My Acro Laser built with my C-Beam XL
Well I built a C-Beam XL around a year ago, I am still learning things as I make stuff with it, it has been quite a wonderful learning experience. Now I have gained enough confidence and knowhow to Mill the required Plates to build an Acro Laser System using the Acro Laser Sketchup Model. I have pulled the Model apart in Sketchup, isolated the Plates and generated the G-Code to cut/Mill the plates. I have used Sketchucam to generate the G-Code. I Use Mach3 on my C-Beam XL to Mill.
Build Author HPB Views 42019
A simple XY laser engraver/cutter
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
Build Author Robert Hummel Views 151353
Laser V
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
Z Axis for ACRO
Created a small Z axis for the ACRO motion system. I wanted to more easily adjust the height of the laser to accommodate various thicknesses of material, without having to manually loosen screws to adjust. Also wanted to be able to vary the height for multiple cutting passes on some materials. Try to stick to a similar aesthetic as the original ACRO system and plates.
Based on 608 tube Plasma Cutter
Simple steel tube design Plasma water table
K40 upgrades
Cheap chinese K40 laser upgrades, including 60x30cm working area, MKS or SKR controllerboard (smoothieware or marlin, not yet decided.) Light, psu and a bit more :)
Build Author Yoshiya Arii Views 40002
V-Slot Laser cutter and engraver
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
Home made CNC Plasma Cutter
Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.
GIGAWATT 2.1 LASER CUTTER
Progetto di un laser CO2 da 50w Autocostruito, con scheda di controllo MKS Sbase v.1.3 Firmware Smoothieware versione CNC Struttura realizzata con profili T-slot 20x20 e 20x40
Build Author Kyo Views 14765
Stinger Laser
3-Axis CNC Laser Engraver running grbl 1.1 in laser mode and Laserweb4.
Designer Jeans with a Laser
I install the third extension on my cnc router and ask me, what can I do with a laser? So I make some test and find out - >>It is possible to engrave jeans clothes<<. Create your own Designer Jeans with a Laser!
(Smaug) 100w 1500x1000mm CNC Laser
Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.
Build Author Superslinky Views 8999
K40 Laser Build (Major Changes)
Major K40 Laser Mod
Corexy laser
I have tested my Opt Lasers laser module on a "open" frame for some time. Decided that I want to test a corexy setup and combine it with a boxed/enclosed design - my goal is to get high precision + a safe setup with protection from the laser light + a fan to extract the smoke/exhaust..
Z-Axis for Laser Diode
Custom Z Axis for OptLaser 6watt and the Acro System
Build Author Jacob Christiansen Views 5852
ACRO 1010 with custom Z axis
This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.
Laser engraving machine
Second better project, high durable mainframe, silent work, non vibration.
Laser cutter
Full aluminium profiles construction. Synrad 50w CO2 laser. Ruida controller. Yaskawa servo motors
Laser engraver
CNC laser with GRBL firmware on board
1.3m x 1.3m RF laser cutter
RF 100w laser cutter build, aluminium extrusion
750x750 Plasma cutter table
It startet in May with some leftovers from a cnc router build. Now in the middle of December its 99% finish. Everything is lowcost, spend about 1600$ so far.
CO2 laser
http://www.buildlog.net/sm_laser/drawings.html using this as a baseline.... Going to try and use all or most off the shelf parts.
CNC Plasma Table 006
Inexpensive plasma table. Accurate, fast, and low maintenance.
Build Author Kims3DIY Views 17176
Beamlazer Laser cutter CO2 100W
Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.
Piggy back engraver for ShopBot
Built from leftover T-Slot extrusions plates and hardware from other defunct projects.
Plasma CNC machine
The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.
Plasma cutter - 608 on steel tube version
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
Build Author Bruce Walker Views 6206
BD's Burn Box - ACRO Laser Engraver System
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
Build Author inhan Views 20180
Openbuilds rovo laser mini(ģ¤ķė¹ė)
laser mini 20 * 40 OPENBUILDS base frame.(ķ¬źø° 412x455mm) laser mini 20*40 źø°ė³øķė ģģ ėė¤. źø°ģ”“ ģ¬ė¬ė¶ķģ ģ¬ģ©ķ ģ ķė³“ė¤ ė¶ķģė„¼ ģ¤ģ“ė©“ģ ģµģķģ ėØź°ė„¼ ė½ģė ¤ź³ ėģģøķģµėė¤.. źø°ģ”“ėė¹ ė¶ķģ ģ ė°ģ ėØź°ė ģ ė°ģ ģ¤ģ“ė©“ģ ģµģ ģģ±ė„ģ ė“ė ¤ķ©ėė¤.
Build Author Sam Price Views 5118
Acros with customizations [WIP]
This is a work in progress ACROS build with new legs and wire tracks.
1250x1000 Build
A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.
Dragon Too Plasma Cutter
A Benchtop Plasma Cutter Concept
Acro 1010 with 10 watt Laser
Built a 32"x40" ACRO Kit for my 10watt Endurance Laser. Put it in a stand alone clamshell cabinet, added a 340cfm 6" fan and variable speed switch for the fan. Using LIght Burn for my primary software. It seems to be work well.
Build Author mytechno3d Views 34710
Plasma cutting table
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
Rotary Axis for Laser Engraver/Cutter
This is a fully adjustable, low profile rotary axis for your Laser Cutter. Many OpenBuilds components are used, plus a handful of 3D printed parts.
Build Author megashub Views 22446
K40 C02 Laser Rail System
An Openbuilds replacement rail system for the common eBay "K40" C02 Laser Cutter
Build Author RobSaunders Views 15989
Laser Cutter/Engraver OptLaser 6W with Z-axis
This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.
x_y_module laser engraver
low cost 2 axis cnc laser, really portable and easily expandable
Build Author Lasersc Views 4204
The D & R TigerPaw Trilogy
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
Minimalist Laser Platform
Minimalist laser platform built with Makerlink connectors and modified Nema 17 stepper mounts used as gantry plates.
Openbuilds Co2 80w Laser Cutter
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
Large format laser
Large format laser build for Student use at my school as well as some personal use.
Vacuum laser table
Large 10āx6ā vacuum table made from steel tubing and 1/4 inch steel plate
Build Author Todd Brous Views 4657
Modified Acro with build plate, Z-axis and OPT Laser
Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.
Phlux Core XY Laser Etcher
A 750mm x 1000mm Core XY Laser Etcher/Cutter. To cut down on cost I tried to have as many parts as possible be printed.
Hevavy duty 1300mm x 1300mm laser cutter Ceramic tube Servo motors
Starting the next Laser build, Plan to complete within 60 days.
Large format plasma ox
I will update this as I go, cad files upon request. My x beam is basically a belt driven r7
Build Author holographic Views 7069
Laser DIY
How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow
100w Laser Cutter Build Log
I rebuild my 2 meter tall 3D printer into a 100w laser cutter
Project Infinity co2 laser
1m x 1.8m 60w co2 laser build.
Build Author pedrofernandez Views 14063
The Franken Forty
This is a K40 machine conversion!!
Build Author Rob Taylor Views 17138
Portable Diode Laser Cutter
Integrating custom machined components and off-the-shelf CNC components to create a portable diode laser etcher with air assist and reasonably substantial z-axis travel.
Build Author Lumberjack Engineering Views 18713
SOLAC: Space Optimized LAser Cutter
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Build Author pedrofernandez Views 9049
K40 Cube Laser Cutter
The k40 cube is a laser cutter build using mostly stock parts of the chinese k40 laser
Build Author MrMojoRisin Views 6775
IIOT WiFi Portable CNC Plasma Cutter
IIOT WiFi Plasma CNC.
LaserShark300
300x300 belt drive laser etching/cutting platform. The design was borrowed from another's blog and customized to fit materials on-hand. Was a very fun project to assemble.
Build Author Hilleke Views 6907
Acro System cable management and enclosure
wooden parts of the enclosure can be removed easily used the existing extraction of my glass bead burners