Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.

Modded OX with full nema23 4 point support

OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.

My version of the popular Lautr3k 3D printer. UNI Panther colors of Purple and Yellow on black V-slot rails. 300x300 bed.

In short...this was a fun project.

A simple wood turning lathe.

This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.

I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.

While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.

A quick and easy way to make a 3-way mitered corner using Corner Connectors

The new C-Beam kit expanded to 1000mm . extra support built in for the extents of the travel.

Super solid core xy build inspired by the e3d tool changer

This build has been an educational experience. Software and hardware alike.

Berrybot inspired delta 3d printer with a few other tweaks and modifications.

This is a handy machine to assemble touch sensors into display frame.

Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.

Major rebuild of my Wanhao Duplicator i3 Plus.

1M C-beam xy variant

XDrive 3d printer, high quality large build volume.

Watercooled 3D printer

Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.

Plasma Mill CNC

This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.

My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...

Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

How to modularize the 3D Systems Cube 3 extruder nozzle.

This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.

Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.

The goal is to have a relatively strong CNC to be able to cut alu. Working space will be around 800x350x100mm.

Custom build, after building the prusa i3 and upgrading to i3v, I wanted to build something more sturdy that can print fast and more accurate. Model is built in Fusion 360

Wanna quet an nice looking device done by my hands

Very stout 2'x4' machine with a deep Z axis

My first printer! I went for a simple cartesian design, based on evilc66 one. It uses 1000 mm C-beam linear actuators. The build volume is 700x700x700 mm^3.

This Build Is Is Inspired By OOZ Nest CNC, But With Some Changes,

A short summary of my Workbee CNC Build. I try to update it where I can

A little project for a rainy day which some, like me, may find useful.

This is the adult version of the QU-BD juvenile known as their OneUp. It not only uses extrusion framing instead of press board MDF, it is a full sized 8x8 build area w/ABS-Nylon capability. Only the OneUp's single Z axis driver concept is similar. I'm tempted to call it OneUpAdult for marketing.

Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.

T-slot, v-slot, aluminum angle make up the majority of the structure.

A Rod-type Linear Actuator based on the 40x40 V-slot profile

Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.

Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.

Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.

The 3D printer will be able to print 2x2x2m components and not just in PLA or ABS. It's not just a DIY printer but I'm trying to apply engineering formulas to make it. I'm going to apply the state of art for 3D printing and scannering existing.

Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later

A small build using some small vslot scrap piece which shows the versatlity of the v-slot system

Simple enclosure for the OB Minimill

I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!

I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)

Small CNC - made with some custom lasercut+bent sheetmetal parts + Openbuilds V Slot

CNC MILLING ROUTER

Lord willing I will be showing you how build a robust and easy to build 3D printer framework using V-Slot rails and rollers. It's a little bulky, but it has all spring tensioned rollers on all axes, and can be built entirely without custom machining on any parts. You will need digital calipers, a drill press, a carbide toothed miter saw for cutting aluminum extrusions, and lots of little screws!

This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.

1500 x 1500 mm OpenBuild CNC

OpenBuilds CNC 500x500

Here is the consolidation of my woodworking shop, a CNC Router!

I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.

This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!

This Project is meant to teach introductory robotics and arduino styled micro-controllers to HS and MS students.

Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1

Not much to say... Soundproofing box for noisy works... Build in MDF and 20 mm plexiglas. Very effective!!!

Increase Z axis travel by 20-25mm with minimal modifications

This is based on core XY kinematics. First of all, we designed a CAD model. Most of the required parts are designed by us in solidworks software, and some parts are downloaded from a web platform ‘grabcad’. After that we assembled those parts and inspected them in solidworks. The designed CAD models are frame of 470mmX392mmX545mm SBR linear guide rod, linear guide holder, lead screw, motor mounts, pulley, bed mount, idler block, timing belt clamper.

This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.

Stabilus 3d Large Format Printer Kit

A stout 3D printer build with the hopes of being able to serve as a light mill (PCB) and laser engraver

I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.

This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.

just wanted to share my build of a huge 3d printer. It stands just over 2 meters tall and has a total print area of around 850mm x 850mm.

Belt driven 3-axis linear system for high precision and low costs. > Threading and linear real cutting needed

Micro Ox Build

Created a small Z axis for the ACRO motion system. I wanted to more easily adjust the height of the laser to accommodate various thicknesses of material, without having to manually loosen screws to adjust. Also wanted to be able to vary the height for multiple cutting passes on some materials. Try to stick to a similar aesthetic as the original ACRO system and plates.

Roberta Clementine's first daughter printer Alice Clementine!

This project is focused on developing a low-cost, portable and open-source FDM 3D Printer.

A small router for thin plate stock

This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.

All metal frame 500mm bed Delta 3D printer

My goals for this build were to eliminate slop and flex while also allowing easy serviceability.

The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.

Just starting a miter saw stop system. Any suggestions appreciated.

Hell Yeah

A framing design for cantilever style printers

Fixed Gantry CNC with good accuracy and rigidity but for a higher price than the usual CNC's on the site.

C-Beam XL with v-slot aluminum bed for fixturing.

It startet in May with some leftovers from a cnc router build. Now in the middle of December its 99% finish. Everything is lowcost, spend about 1600$ so far.

My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it

This is the largest printer I have found. It is also the cheapest. The reason is that it is run by hand, without computer or motors or electronics. Put an object on one side and move the 3d pen while tracing the object. Move the z dimension by turning the crank on the lab jack to move the printed copy down a notch. Be creative!

I am satisfied with my build and next one will be even better.

I've been working on commercial woodworking CNC's for year's under shop owner's that didn't want me to progress any further at a certain point. This is a project I've wanting to build for about 10 years now. I can't wait for the freedom to build what I know is possible without any negative input.

The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.

This is a modification I made to my Voxel Ox 3D Printer Z axis, which synchronizes the Z leadscrews via a shaft and helical gear transmission. It prevents the two Z leadscrew from getting out of adjustment relative to each other, and uses a single Z motor instead of two. This build is just documenting the specific changes I have made to the Z-axis, since the frame and other axes are still from the original Voxel Ox design.

I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.

First time CNC user having a good time with a MiniMill

A modified 1000x1000 Sphinx, with a built in vaccum table.

Build a 2x72 Belt Grinder out of OpenBuilds V-Slots

Cartesian type 3d printer build

Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller

Z-Axis upgrade with linear rails, SFU1204 Ball Screw and full aluminium construction.

v-slot linear actuator build.