This is a work in progress 3D printer Dimensions are 230x230x340mm height. Print dimensions are: 135x135x160mm. Prototype has a bowden extruder with a J-head hotend. Assembly instructions: http://reprapstyle.blogspot.pt

Great bit of kit time will tell if it is up to the job

Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint

Delta printer, Bed size 280 cm dimeter Print Height 300 cm not tested yet the speed

A new derivative of the famous OX CNC, with increases strength, rigidity, and accuracy.

A work in progress. working to refine the print head/carriage to integrate a bed level probe directly into the print head.

My first custom build, using vslot rails for Z and Y and 8mm rails for X. Currently printing parts for this using my Prusa I3. The build volume will be roughly 300mm^3, X and Y are belt driven with 8mm acme lead screws for Z. Will be uploading more info shortly as i continue to build the printer.

This is a basic description of my OX-like build of Babe, Paul Bunyan's Blue Ox. It is a work in progress. The idea has been germinating for about 4 years, with several twists and turns and false starts along the way.

The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.

This will be an OX based machine which I've designed to make the best use of my materials, be as precise as the design allows and operate as quietly as possible. I live in an apartment complex so space and noise are two important factors for me. Therefore the machine needs to do as much as possible while using little space and not annoy the neighbours.

A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.

Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!

A small, quiet and clean desktop CNC designed for fine cutting.

A compact portable DIY camera slider for time lapse photography using a GoPro.

Here is my first ever CNC build. A CNC Hotwire Foam Cutter. I will update about achievements. I would love to read from you guys - advices, ideas. Especially regarding the electronics. I feel confident with the hardware part which I can't say about the electronics part.

Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool

My adventure in CNC routing.

2x4 Ox with Vac table

Micro Ox Build

My version of the popular Lautr3k 3D printer. UNI Panther colors of Purple and Yellow on black V-slot rails. 300x300 bed.

This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!

I creat a open source 3D Printer to print big things. Print size: 400x500x300 mm. You can download the Drawing in PDF and in Inventor 2013 format. The unwinding drawings are also included. I take some detail photos for a better understanding.

This is our first CNC project is based on OX CNC. We show you some pictures about our progress. We finished assembly design, software test and drivers test, now we are building the machine.

An OX Router I'd like to modify to improve the frame rigidity and resolve some alignment problems

My first cnc

I like this design a lot. It's very stable, very strong and with the EX2 enhancements, it prints like a champ.

This is just a small project to get use to the OpenBuild products.

Rigid 3d printer with more than enough room for dual extruders. Easily expandable platform.

An OX build - little large than specs and plates 3D printed

A bigger OX. As this build is nothing new I will detail my build process, I am not an experienced builder, this will maybe help someone else. The size of the bOX will be 100cmx75cm. I will use aluminium plates, a tinyG, and most probably only open source / free software.

I am hoping to post a detailed build of my printer it is a large format using the RepRap RAMPS 1.4 & Mega 2560 & DRV8825 Driver + optical end stop +LCD 12864 -C 0.4mm Far-end Distal Dual-Head Nozzle Extruder Double Nozzle

This is a 1500 x 1500 Ox build

This is the adult version of the QU-BD juvenile known as their OneUp. It not only uses extrusion framing instead of press board MDF, it is a full sized 8x8 build area w/ABS-Nylon capability. Only the OneUp's single Z axis driver concept is similar. I'm tempted to call it OneUpAdult for marketing.

T-slot, v-slot, aluminum angle make up the majority of the structure.

High Power DC MOSFET

Custom build plate for 300mm x 300mm (12"x12"). The hole pattern is for the 20x60 V Slot

Custom build, after building the prusa i3 and upgrading to i3v, I wanted to build something more sturdy that can print fast and more accurate. Model is built in Fusion 360

This build log will chronicle the construction of my oversize (1000mm X 1500mm) OX router.

A small router for thin plate stock

A Workbench idea built from V-slot and openbuilds parts.

This is the story of my progression from the JGRO cnc router design to using the OpenBuild system. In the process I think I have learned some things about cnc routers and the accuracy required to make a good build.

Building the full size OX.

SMD AVR Solderless Daughter Board

A practical rotating and stand-alone spool holder which fits any filament extrusion 3D-printer. Several base files provided which make it fit different extruded aluminium profiles.

This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.

Our version of the OX, a Cartesian CNC Router Build. 1,500 mm Y-Axis, 1,000 mm X-Axis, 300 mm Z-Axis - Lots of Fun!

My first Build with V-slot

Just an easy build .... uncomplicated.... simple tools .... but hoping for a good result!

A 1000 x 1500 OX build with the ability to router cut dovetails as well as laser engraving and light cutting.

This is my first cnc build, never used one before and don't know too much besides what i've read a little bit about them online. It's probably going to be about 31" y axis with hopefully around 4ft x axis, z height is still to be determined.

Large leveling platform to hold a 3hp router

an 8x4 CNC Router based on the OX

A portable foam cutter to make your forms everyware using a LiPo Battery.

Design of a multifunctional CNC machine.

Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.

150x75 cm OX with additional Y axis supports and hopefully a working double belt system

It is a first draw of my future Printer/CNC cutter.PCB mill Still need to work more on it

This build is a modified Ox build. The long rails are 1000mm. My build includes a solid clamping table.

Berrybot inspired delta 3d printer with a few other tweaks and modifications.

The Echinus Team change the Firmware from "Teacup" to "Marlin". I use this board in my 3D Printer and it works very good! So I write a short report.

OX MultiMachine

An USB Pendant for LinuxCNC / Mach3

I am building a Laser cutter based off Robert Hummel's Laser V design.

Multi-tool 3D printer, laser cutter, and CNC mill.

ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic plates for the Routy. A simpler, more refined machine.

I hope to have a working prototype built soon.

I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.

Prosthesis is functionality and emotion!

For all other builders and robotic technies!

Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.

Delta printer that uses printed carriages sliding on aluminium extrusions.

Easy build cnc router with t slot profile and nylon machined part

this is my first attempt at a CNC Table

CNC MILLING ROUTER

This is a work in progress(not printing yet). Expect this instructions to grow with time, but for now it is mainly interesting for those who want to take part in developing this printer.

www.cncforeveryone.com TITAN CNC ROUTER is the perfect PCB milling machine or for smaller projects. Don't be fooled by its small size it is capable of routing with the big boys...!

I'm looking to build a large build-volume, accurate, steady 3D printer with the eventual aim of swapping in a diode laser to allow for use as a cutter for printing/cutting parts out of balsa sheet for building model aircraft.

The method used for tool position setting is a matter of personal choice but this is what I do.

I've made a 3D printer

A simple low cost rotomolder.

Converting a ShapeOKO into a 3D printer.

Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.

As a 3rd year mechatronic engineer with a plan to print my 4th year thesis project and with no elegant backup plan, I ran into a problem, I'm gonna need a bigger printer. Loving the DeltaPrintr kickstarter, but needing it before the end of next year I have resolved to make my own.

A little project for a rainy day which some, like me, may find useful.

All's good for assembly, testing coming up soon

One Linear Actuator covering two dimensions, WHAT!